Anybody fitted aps or hyperflow fmic in lhd ?
13 September 2001, 10:52 PM
#6
Scooby Regular
Join Date: Aug 2000
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Hi Stelios,
I think the reason it will not fit is because the pipe coming from the N/S of the intercooler is part silicone/part metal.The metal part actually runs underneath the N/S header right across the point where the steering coupling would be on a LHD car.
I suppose it would be possible to get it to fit "if" you could get a new custom made piece of silicone hose.
Sorry its not good news.
Regards
Steve
I think the reason it will not fit is because the pipe coming from the N/S of the intercooler is part silicone/part metal.The metal part actually runs underneath the N/S header right across the point where the steering coupling would be on a LHD car.
I suppose it would be possible to get it to fit "if" you could get a new custom made piece of silicone hose.
Sorry its not good news.
Regards
Steve
14 September 2001, 12:31 AM
#7
Scooby Regular
Thread Starter
Join Date: Mar 2001
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Hi Kev,
Is that true for a left hand drive car?
Thx about the VF22 vs VF30 advice ill be ordering one vf30 soon from ya as soon as i get the Fmic issue out of the way and thx again for the advice
Stelios
Is that true for a left hand drive car?
Thx about the VF22 vs VF30 advice ill be ordering one vf30 soon from ya as soon as i get the Fmic issue out of the way and thx again for the advice
Stelios
Trending Topics
14 September 2001, 12:58 AM
#8
Former Sponsor
Join Date: Apr 2001
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Stelios
Our intercooler plumbing routes over the engine...not under it....so the steering rack has no intercooler plumbing anywhere near it..
Email me a close up photo of your drivers side of the engine bay and I will be able to tell if there are any fitment problems there.
Kevin
Our intercooler plumbing routes over the engine...not under it....so the steering rack has no intercooler plumbing anywhere near it..
Email me a close up photo of your drivers side of the engine bay and I will be able to tell if there are any fitment problems there.
Kevin
14 September 2001, 09:56 AM
#10
Scooby Regular
Thread Starter
Join Date: Mar 2001
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Thx all
Steve
thats what i thought
Craig
Where did u learn about APS developing a lhd kit? The thing that worries me is that i e-mailed APS and said Quote: I dont think fitting a lhd should be a problem Unquote. Now u telling me they are working on a lhd kit hmm should i jump to conclusions?
Hyperflow has similar piping and they also said that they *think* it will fit a lhd car. (They were very friendly though and adviced me on a turbo issue!)
Steve
thats what i thought
Craig
Where did u learn about APS developing a lhd kit? The thing that worries me is that i e-mailed APS and said Quote: I dont think fitting a lhd should be a problem Unquote. Now u telling me they are working on a lhd kit hmm should i jump to conclusions?
Hyperflow has similar piping and they also said that they *think* it will fit a lhd car. (They were very friendly though and adviced me on a turbo issue!)
14 September 2001, 02:25 PM
#12
Scooby Regular
Thread Starter
Join Date: Mar 2001
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Will do Kev, I think WREXY (hint: he is waiting to see is your fmic will fit to go the same way) has some ready pics Ill get him to e-mail u some
(very professional of u Kev)
Stelios
(very professional of u Kev)
Stelios
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM