Theory on decat celfix for MY01-
#1
Theory on decat celfix for MY01-
With only the centre cat left in position you can still get the cat below efficency cel come on.
My theory is this-the rear lambda sensor is situated before the rear cat,if i was to add a tapping for it after the cat,surely this would stop the cel from coming on due to it picking up "catted" exhaust.
Anyone have any ideas on this?
easy
My theory is this-the rear lambda sensor is situated before the rear cat,if i was to add a tapping for it after the cat,surely this would stop the cel from coming on due to it picking up "catted" exhaust.
Anyone have any ideas on this?
easy
#3
Just solder 1μF tadalum capacitor between blue-white wire and 1MOhm resistor in blue wire and forget once and for all PO420 CELs, as simple as that!
Be carefull this combo is for 01-02 cars, 03-04 cars require only the 1MOhm resistor.
JIM
Be carefull this combo is for 01-02 cars, 03-04 cars require only the 1MOhm resistor.
JIM
#4
Thanks-i think you allready told me about the resistor/ capacitor fix,but i still havnt got around to sourcing the components yet.
Do you fit them at the sensor end or the ecu end,as i understand that the colour coding changes between the sensor and the ecu.
Thanks again
easy
Do you fit them at the sensor end or the ecu end,as i understand that the colour coding changes between the sensor and the ecu.
Thanks again
easy
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM