power steereing fluid help
#1
![Unhappy](https://www.scoobynet.com/images/icons/icon9.gif)
hi im having trubble with my 95 wrx i have a leak of power steering fluid from somewere iv chainged out the pump and its still doing it from ? has anyone had the same problem .the fluid seems to be sitting on the top of the block and runs down onto the exaust manifold and smokes and its getting on my goat....any idears????????????
Last edited by mick40; 11 October 2004 at 07:33 PM. Reason: title
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
there is a seal between the pump and the resivoir..
unbolt the resivoir (three bolts from memory) and remove the pipe on the left and lift it out and there is a small rubber seal that sits about half inch from the bottom of the pipe that comes out of the bottom of the resivoir that goes into the pump.
About 90p from a dealer... also if you overfill it will leak out of the cap.
Watch it with it dripping on the exhaust as it is highly flammable.
unbolt the resivoir (three bolts from memory) and remove the pipe on the left and lift it out and there is a small rubber seal that sits about half inch from the bottom of the pipe that comes out of the bottom of the resivoir that goes into the pump.
About 90p from a dealer... also if you overfill it will leak out of the cap.
Watch it with it dripping on the exhaust as it is highly flammable.
Thread
Thread Starter
Forum
Replies
Last Post