stevenuk300 still

iTrader: (1)

Where's the best place to purchase exhaust lagging from? Rough price guide and approx length required for up and down pipe would be appreciated.

scooby-k

www.provenproducts.co.uk
I used 50metres x 50mm cooltek wrap for down pipe and had enough to almost do entire centre pipe.
ken

stevenuk300 still

iTrader: (1)

Thanks for the link
What sort of price do they sell it for?, I can't seem to find it on their site.

The best price I've seen so far is £35 for 50ft by 2"

SpoonZ

5metres of 50mm is £9

30 metres is £40, liitle too much for a downpipe though

scoobyDAZZA

just done mine
got it from proven products as well
after searching everywhere they were the cheapest
i done my headers,up-pipe and half of my downpipe with 30 metres
get plenty of them little steel ties though . .
they give you 10 and we used them before we got to the downpipe.
i need another 10 of them and another 10 metres to finish it off now

well worth doing

scoobyDAZZA

oh,,btw i only purchased 30 metres x 50mm

stevenuk300 still

iTrader: (1)

I've seen it for £35 on thermallogic.co.uk.

Is there much of a difference between different types?

dj219957

just put a full decat on my 96 wrx . Is it worth it on mine?
Heard that high under bonnet temps increased det?

TONY F

you would be better off wrapping the downpipe

Dyney

see: http://bbs.scoobynet.co.uk/showthread.php?t=362070

scooby-k

best have too much than not enough. get 50 metres
wrapping has three benefits . one keeps heat in, two quietens the exhaust. three promotes pops
ken

stevenuk300 still

iTrader: (1)

I definately want to do the up and down pipe, and if it adds any advantage, to do the centre section as well.

scooby-k

I only did centre section cos I had some left over. thought it might dampen noise level into cabin a bit. It's been on car for over 12 months and still looks like new.
ken

stevenuk300 still

iTrader: (1)

Thanks for all the advice. Just need to wait for the up and down pipe to come in now.