scooby.reed

1" x 50 ft
2" x 50ft
2" x 15ft any of you good peeps used this and what amount? Only covering the downpipe

please help car due to have pipe fitted Monday 14

scooby.reed

bttt

1" x 50 ft
2" x 50ft
2" x 15ft any of you good peeps used this and what amount? Only covering the downpipe

please help car due to have pipe fitted Monday 14 [/QUOTE]

skiddus_markus

2"x50 feet will leave you some over if you need to do it again.

scooby-si

2" 15ft will do it

i used 2" 75ft, that did my headers up pipe and down pipe

Comper100

I know that 10m x 50mm was only enough to do about 2/3 of my 3 inch downpipe.

Hope that helps

Ninnybobs

Just done a 3" downpipe and it took 35feet of 2inch heatwrap.

Hope this helps

Martin

harvey

iTrader: (48)

DEI wrap from Nimbus Motorsport has a stiching to show the correct overlap.
You will need one roll 2"x50 feet for a 3" open neck D/P with some left over. Apply damp but not wet. Plenty tie wires. Goodridge tie wire or similar, quite thick wire if there is a choice and a tie tool will speed up the job if you can beg, steal or borrow.....

scoobyDAZZA

just done mine
had 2" x 15 foot , , nearly reached half way lol
was meant to order 15 metres not foot . . derrrgh...

stevenuk300 still

iTrader: (1)

Just done my up and down pipe and used 2" x 50 exactly.