Re map ?????
30 May 2005, 06:14 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Re map ?????
I`ve got a 97 wagon with prodrive ecu , boost increased to 1 bar ( via Dawes Device) and a full 3" de-cat. I`d like to have it mapped to get the best out of of my mods. I`ve spoke to a few places But its seems they just want to supply and map a different chip which works out expensive. But i just want mine remapping. Is this possible ? Anyone help ?
White Un
White Un
30 May 2005, 06:48 PM
#2
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Well some bad news for you im afraid 
you cant remap your ecu, so if you want a remap its going to be on a different ecu, id speak to Jap innovations or Andy F for info on what you can do.
Tony
you cant remap your ecu, so if you want a remap its going to be on a different ecu, id speak to Jap innovations or Andy F for info on what you can do.Tony
31 May 2005, 10:13 AM
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Would i be be better off getting a standard ECU havin that remapped and selling my prodrive one ? Cause dont fancy payin 800 quid just for a tune up cause thats all i want.
White un
White un
31 May 2005, 12:55 PM
#5
31 May 2005, 01:59 PM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jolly Green Monster
YHPM..
Trending Topics
31 May 2005, 02:01 PM
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TonyBurns
You cant map that ecu, you will need a different type if you want to have it remapped, as above the apexi is probably your best bet.
Tony
Tony
White un
31 May 2005, 02:07 PM
#9
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
The problem is the 98 cannot be remapped as Tony has been saying.. well one place do it.. Power Engineering I believe but it will cost you more than I quoted for an Apexi.
Simon
Simon
31 May 2005, 02:15 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jolly Green Monster
The problem is the 98 cannot be remapped as Tony has been saying.. well one place do it.. Power Engineering I believe but it will cost you more than I quoted for an Apexi.
Simon
Simon
31 May 2005, 02:21 PM
#11
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
if it has a slanty intercooler then it must be a 96.. check out the www.sidc.co.uk and look at the FAQ and check the chassis number to see year.
If it is a 96 then Paul at Zen can remap it..
http://www.zenperformance.co.uk/
If it is a 96 then Paul at Zen can remap it..
http://www.zenperformance.co.uk/
31 May 2005, 02:23 PM
#12
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jolly Green Monster
if it has a slanty intercooler then it must be a 96.. check out the www.sidc.co.uk and look at the FAQ and check the chassis number to see year.
If it is a 96 then Paul at Zen can remap it..
http://www.zenperformance.co.uk/
If it is a 96 then Paul at Zen can remap it..
http://www.zenperformance.co.uk/
its a p reg thought it was 97 Doh !!!!I`ll check that link out
Cheers White un
31 May 2005, 03:17 PM
#15
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Apexi, Link, GEMs.
Apexi would be your cheapest and most like original ecu once installed.
Link you can lose the MAF sensor.
Gems you have anti lag to make lots of pops and bangs and can lose the MAF sensor. lol
The only other problem with 96 is the map sensor tops out at around 1.15bar so you need to have another way of increasing the boost beyond that and controlling it..
Dawes being the cheapest.. Apexi AVCR the more expensive but proper route or the Apexi has a boost kit, but all getting more expensive.
I am having to be careful not to get a wrist slapped for advertising.. but I can do any of the above.
Or get Zen to remap with a scoobyecu.. and I think Pat via Scoobyclinic might be able to do that too.
Simon
Apexi would be your cheapest and most like original ecu once installed.
Link you can lose the MAF sensor.
Gems you have anti lag to make lots of pops and bangs and can lose the MAF sensor. lol
The only other problem with 96 is the map sensor tops out at around 1.15bar so you need to have another way of increasing the boost beyond that and controlling it..
Dawes being the cheapest.. Apexi AVCR the more expensive but proper route or the Apexi has a boost kit, but all getting more expensive.
I am having to be careful not to get a wrist slapped for advertising.. but I can do any of the above.
Or get Zen to remap with a scoobyecu.. and I think Pat via Scoobyclinic might be able to do that too.
Simon
Last edited by Jolly Green Monster; 31 May 2005 at 03:27 PM.
31 May 2005, 03:58 PM
#16
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: On the laptop !!
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jolly Green Monster
Apexi, Link, GEMs.
Apexi would be your cheapest and most like original ecu once installed.
Link you can lose the MAF sensor.
Gems you have anti lag to make lots of pops and bangs and can lose the MAF sensor. lol
The only other problem with 96 is the map sensor tops out at around 1.15bar so you need to have another way of increasing the boost beyond that and controlling it..
Dawes being the cheapest.. Apexi AVCR the more expensive but proper route or the Apexi has a boost kit, but all getting more expensive.
I am having to be careful not to get a wrist slapped for advertising.. but I can do any of the above.
Or get Zen to remap with a scoobyecu.. and I think Pat via Scoobyclinic might be able to do that too.
Simon
Apexi would be your cheapest and most like original ecu once installed.
Link you can lose the MAF sensor.
Gems you have anti lag to make lots of pops and bangs and can lose the MAF sensor. lol
The only other problem with 96 is the map sensor tops out at around 1.15bar so you need to have another way of increasing the boost beyond that and controlling it..
Dawes being the cheapest.. Apexi AVCR the more expensive but proper route or the Apexi has a boost kit, but all getting more expensive.
I am having to be careful not to get a wrist slapped for advertising.. but I can do any of the above.
Or get Zen to remap with a scoobyecu.. and I think Pat via Scoobyclinic might be able to do that too.
Simon
Thanx for your help simon think i`m just gonna have to wait a while and save for the Apexi FC
31 May 2005, 11:25 PM
#19
Scooby Regular
Join Date: Feb 2005
Location: Scratcham
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
yes what that about, ive been reading through alot of crap also sound adivce,need to no wether to remap or not, what ecu, ect ect ect, please explain!
Originally Posted by White-Un
Whats that about ?
01 June 2005, 12:43 AM
#20
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
lol @ Andy.
Andy was trying to say that I had been trying to net another mapping job and that I had failed..
A friendly jibe if you like.
I hope I was giving advise rather than just trying to hard sell something, please do tell me if that is not the case.
I sent two people wanting ECUTek your way so far this week Andy.
Thanks and goodnight
Simon
Andy was trying to say that I had been trying to net another mapping job and that I had failed..
A friendly jibe if you like.
I hope I was giving advise rather than just trying to hard sell something, please do tell me if that is not the case.
I sent two people wanting ECUTek your way so far this week Andy.
Thanks and goodnight
Simon
01 June 2005, 10:10 AM
#24
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM