gearbox
#1
gearbox problems
can someone help me please i have a wrx jap import on a 95 mreg my box went and i put a english legacy box and diff in since i put it in i cant get no clutch pressure iv changed the clutch master cyclinder and bleed it but not a danny pedal still goes to the floor does anyone have any ideas im stuck thanks for your help jon
Last edited by waprilp; 29 December 2005 at 01:50 PM.
#2
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Using a big screwdriver or tyre lever force the clutch slave cylinder piston, via the clutch operating lever, as far back as it will go. Then bleed it holding the cylinder where you have it.
Once bled, let the clutch operating lever return slowly by pressing the clutch pedal and releasing pressure on the screwdriver allowing the piston to follow it back out.
Hey Presto, it works again.
Good luck David APi Impreza / APi engines
www.apiengines.com
Once bled, let the clutch operating lever return slowly by pressing the clutch pedal and releasing pressure on the screwdriver allowing the piston to follow it back out.
Hey Presto, it works again.
Good luck David APi Impreza / APi engines
www.apiengines.com
Thread
Thread Starter
Forum
Replies
Last Post