Can't find second gear!
#1
Can't find second gear!
Since i got my car, uk turbo 2000 '94, it has always been a little stiff to get into first but never really botherd me - i thought it was just a typical impreza gearbox!
A few days ago, braking up to a roundabout i couldn't get into second gear, it's been like this since.
This happened a few weeks ago but only lasted a few minutes then was back to normal.
Has anyone got any ideas what this may be?
Thanks,
Mark.
A few days ago, braking up to a roundabout i couldn't get into second gear, it's been like this since.
This happened a few weeks ago but only lasted a few minutes then was back to normal.
Has anyone got any ideas what this may be?
Thanks,
Mark.
#2
Could be a bent selector fork or similar damage as you force the gearlever to select a gear.
Is the rest of the box ok?
If so and everything is silent in operation you will need expert help.
On tuesday try David at www.apiengines.com
Graham.
Is the rest of the box ok?
If so and everything is silent in operation you will need expert help.
On tuesday try David at www.apiengines.com
Graham.
#4
Scooby Regular
iTrader: (2)
Join Date: Dec 2002
Location: All over the place, trying to stop putting the miles on!
Posts: 1,197
Likes: 0
Received 1 Like
on
1 Post
If you had bent a selector fork you would probably not be able to select a pair of gears 1-2 uses one fork 3-4 another and 5-R another.
Sounds to me like a syncro issue, the teeth have probably been damaged on one side of the syncro and jammed the outer ring.
Sounds to me like a syncro issue, the teeth have probably been damaged on one side of the syncro and jammed the outer ring.
#5
Scooby Regular
Join Date: Jan 2005
Location: www.aroundthesouth.co.uk
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
mine did this a few time but then it took 2 months before i could get it back it was only because i missed 3rd and hit frist ( lots of grinding) it it seem to sort it out
#6
The rest of the box is good, apart from first gear which feels a little 'notchy' to get into.
There haven't been any crunches or noises, it just physically wont go into second gear, tried engine on, off, clutch up, down etc.
If it was the selector fork, how easy are these to replace?
Thanks,
Mark.
There haven't been any crunches or noises, it just physically wont go into second gear, tried engine on, off, clutch up, down etc.
If it was the selector fork, how easy are these to replace?
Thanks,
Mark.
#7
Scooby Regular
Join Date: Jan 2005
Location: www.aroundthesouth.co.uk
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
i was told mine was wrong oil making it "sticky" and to get it warm and try but nothing worked it felt like something was blocking 2nd but after the grinding in first its been "ok" but grinds going in to 2nd now
Thread
Thread Starter
Forum
Replies
Last Post