MY01 ECU reset?
22 November 2001, 02:06 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2001
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know how to do a MY01 ECU reset, much like connecting the 2 plugs (green and black) under the steering column of the pre-MY01 cars and then drving around till the "check engine" light blinks the steady all-clear?
Is there such a function on the newer cars?
Tks.
Is there such a function on the newer cars?
Tks.
22 November 2001, 06:07 PM
#2
Scooby Regular
Join Date: Dec 2001
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
I believe the advanced engine management of the MY01s don't require a reset as the advance and retard timing etc almost in real time, not days/weeks in the case of My00s & earlier & weeks/months in the case of My97s & earlier.
22 November 2001, 06:35 PM
#3
Scooby Newbie
Join Date: Oct 2001
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
God am I a expert in EOBD 2. (i.e read pain in the a___ system.) Anyhow no external reset available, the system needs accessing with OBD software via the plug under the steering column and the fault codes clearing.
Thers is no manual method of accessing the codes or clearing them, Alex Pepper www.obd-2.com
sells software / hardware to clear codes.
The system will reset after 40 cycles if the fault clears.
The most common fault code 420 cat failure on modded exhausts.
Thers is no manual method of accessing the codes or clearing them, Alex Pepper www.obd-2.com
sells software / hardware to clear codes.
The system will reset after 40 cycles if the fault clears.
The most common fault code 420 cat failure on modded exhausts.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
alcazar
Computer & Technology Related
2
29 September 2015 07:18 PM