power loss
30 December 2001 | 10:44 AM
#1
Thread Starter
Scooby Regular
Joined: Dec 2001
Posts: 6,963
Likes: 0
From: Just far enough from sunny Liverpool
I have recently added a scoobysport d/p, centres and back box to my MY01, complete with an ITG filter panel.
It sounds excellent, but i seem to have lost power and gained a 'whooshing' noise, like i have a hose loose somewhere.
any ideas??
simon b.
It sounds excellent, but i seem to have lost power and gained a 'whooshing' noise, like i have a hose loose somewhere.
any ideas??
simon b.
30 December 2001 | 11:37 AM
#2
Scooby Regular
Joined: Nov 2000
Posts: 18,658
Likes: 1
From: 32 cylinders and many cats
On MY00 the ITG does make a whooshing sound (like 10% of the volume of an induction kit).
If you have lost power then you need to know boost, fuelling and ignition advance to diagnose it properly and if there is a problem remove items you have modded until it is OK again. You COULD be running lean, could be overboosting, lots of things. Need to get it checked out on a Select Monitor &/or RR +/- Lambda or Knock Links. Hassle, but otherwise we would only be guessing what the problems is.
If you have lost power then you need to know boost, fuelling and ignition advance to diagnose it properly and if there is a problem remove items you have modded until it is OK again. You COULD be running lean, could be overboosting, lots of things. Need to get it checked out on a Select Monitor &/or RR +/- Lambda or Knock Links. Hassle, but otherwise we would only be guessing what the problems is.
Thread
Thread Starter
Forum
Replies
Last Post