my car was a auto and a manal pls help
#1
my car was a auto and a manal pls help
Hi every one i have a wrx import it use to be a auto but was changes to manual i have not had the car long after a day driving the car around it stared to feel like the car was missing on boost it had a z4 ecu but i change it back to the stander one thinking it could be that but now it feel so slow and still misses now and again pls pls pls pls the car is a p reg and only do 85 k i have tried to turn the boost up buy adding a boost valve but it gets worse iv change the plugs and leads but this has not helped was told these a wire on the ecu that need to be cut as the car still thinks its a auto . cheers Tim
#3
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
It sounds as though whoever did the conversion has not removed the auto box control unit up behind the speedo. It is a common mistake.
There is an ECU purely for the auto transmission. Just disconnect it from the main harness and then usually all is well. Unless of course the car actually has a fault.
Do that first and then tell us how you get on.
David APi
There is an ECU purely for the auto transmission. Just disconnect it from the main harness and then usually all is well. Unless of course the car actually has a fault.
Do that first and then tell us how you get on.
David APi
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM