fitting 6 speed does apexi need re mapped
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: dumfries/scotland
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
fitting 6 speed does apexi need re mapped
going to be fitting a 6 speed gearbox from a uk 02 plate sti into my classic terzo which is running apexi fc ecu and apexi avec-r boost controller, my question is does my car need a remap so that the apexi can identify the 6th gear??????, never even thought about this till someone mentioned it and don't have a scooby on the answer
apppreciate any help or thoughts on this
apppreciate any help or thoughts on this
#4
Scooby Regular
iTrader: (3)
Join Date: Jun 2010
Location: Greece
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
but the avcr has the "gear learning" thing. The APEXi ECU may not need a remap but the avcr needs a little bit of tweaking as far as I know.
Last week I fitted an avcr on my GT MY00 with an STI 6MT and I had to set the gears right because I want different boost levels across the various gears.
Am I wrong?
Last week I fitted an avcr on my GT MY00 with an STI 6MT and I had to set the gears right because I want different boost levels across the various gears.
Am I wrong?
Trending Topics
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
It needs tweaking if gearing is longer
98uk to 6spd uk is simiar
The in gear can be set in a number of ways but currently it will roughly think 5 is 6th and 4 is 5th etc and use the same duty for 1st and 2nd
98uk to 6spd uk is simiar
The in gear can be set in a number of ways but currently it will roughly think 5 is 6th and 4 is 5th etc and use the same duty for 1st and 2nd
#9
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: dumfries/scotland
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
thanks for all the replies so i should be ok going from my uk 5 speed to uk six speed as JGM stated........at least thats one less thing to worry about...
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
bro82
General Technical
4
17 September 2015 07:41 AM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM