Any1 got anything against castrol GTX magnatec 10w:40?
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Question](https://www.scoobynet.com/images/icons/icon5.gif)
Just wondered since i cant find silkolene pro s, castrol RS or such like locally & got me service looming this Saturday & dont want dealer using 5:40 shyte so need 2 get sumin half decent soon & that was only half decent looking stuff i could find. So any1 got owt against it?
Cheers
Si
Cheers
Si
#2
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
![Smile](https://www.scoobynet.com/images/icons/icon7.gif)
I used to use it an my old MY96. Its not fully synthetic but nowt wrong with it for a bit IMHO. As long as the viscosity is ok, im sure it wont hurt.
Silkolene is absolute ****e in the eyes of most bikers / engineers as far as I can tell.
Other one to use is the shell Ultra Helix - I think its 5W 40, and reccomended by Subaru. Its in a grey container and is the most pricey one, but still a good deal.
MB
Silkolene is absolute ****e in the eyes of most bikers / engineers as far as I can tell.
Other one to use is the shell Ultra Helix - I think its 5W 40, and reccomended by Subaru. Its in a grey container and is the most pricey one, but still a good deal.
MB
#3
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.scoobynet.com/images/icons/icon9.gif)
Oh bugger sod that then i had used it to top up when i was low but it's gora b fully synth from popular opinion it wood seem & 5W:40 is the reason i'm looking 4 sumin else as that's wot dealer is guna use.
I take it from the blanked out obscenity that u ment silkolene isn't good?
Argh **** bugger etc not looking promising 4 me finding sumin pucker b4 Saturday![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Si
I take it from the blanked out obscenity that u ment silkolene isn't good?
Argh **** bugger etc not looking promising 4 me finding sumin pucker b4 Saturday
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Si
#4
Scooby Regular
Join Date: Jun 2001
Location: MY99->MY02->996->MY06STI in Herts / Beds / Bucks
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
No No--- Dont use the Shell Ultra Helix fully synth - the 5-40 is too thin and will knacker things up! I nearly did this a while back - got set straight and ended up putting it in the wifes focus - in which it made huge difference to the engine noise.
Get some Mobil1 Motorsport 10-50 Full Synth from Halford - yep it'll cost 40 quid for that 4L + 1L bottles - but look on the bright side the next time you'll only need 1 4L bottle !
Hope I'm not too late.
T.
#5
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.scoobynet.com/images/icons/icon9.gif)
Not too late yet but i'm having so much trouble getting a 10W:40 or 50 & the only mobil they had @ halford was 15W:50 & didn't say motorsport should this actually be on the outside of container? Just getting very confused & despairing no end here![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
I dont wana let them use mobil 5W:40 i believe it is from reading various sites but as i say not having much joy elsewhere![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
So just to recap is mobil motorsport different to the mobil fully synth stuff & they do do it in a 10W:50 then do they?
Ta
Si
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
I dont wana let them use mobil 5W:40 i believe it is from reading various sites but as i say not having much joy elsewhere
![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
So just to recap is mobil motorsport different to the mobil fully synth stuff & they do do it in a 10W:50 then do they?
Ta
Si
#7
Scooby Regular
iTrader: (2)
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Use GTX Advanced and have done on my last 3 Cars....
180BHP Series 1 RS Turbo
1992 WRX
1986 3-Door Cosworth
And Current 1994 UK Prodrive Edition...
If you look at the chart in Halfords is actually recommends Semi Syth Advanced Castrol...
Unless your running a blueprinted/race engine or don't change the oil at the recomended intervals or sooner Mobil and the like are money down the drain... or blown out the exhaust if you go for 0W/40 Mobil 1.
180BHP Series 1 RS Turbo
1992 WRX
1986 3-Door Cosworth
And Current 1994 UK Prodrive Edition...
If you look at the chart in Halfords is actually recommends Semi Syth Advanced Castrol...
Unless your running a blueprinted/race engine or don't change the oil at the recomended intervals or sooner Mobil and the like are money down the drain... or blown out the exhaust if you go for 0W/40 Mobil 1.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Unhappy](https://www.scoobynet.com/images/icons/icon9.gif)
Soz peaps but i want fully synth that is wot cars of a scooby nature need when run in & i aint guna skimp on a few quid of oil
& no i dont wana use 5W:40 kuz by popular opinion from peaps on here it is toooooo thin & i dont wana risk it so can u get this mobil 1 in 10:50 or not as i dont wana really go 4 15w:50 aint i 1 proper fussy get
I want 10:50 or better still 10W:40 but cant find ouw accept the silkolene stuff which seemingly no1 likes either!
argh help!!!!!!!!!!!!!!
Si
![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
Si
#9
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
si,
i use shell helix plus. its a semi-synthetic 10W 40 oil. recommended by subaru, and hence what the dealer uses around here. thrash the **** off my engine (non-standard) and have no probs at all..........touch wood![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
p.s. still havent fixed the bloody pc problem mate
i use shell helix plus. its a semi-synthetic 10W 40 oil. recommended by subaru, and hence what the dealer uses around here. thrash the **** off my engine (non-standard) and have no probs at all..........touch wood
![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
p.s. still havent fixed the bloody pc problem mate
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
#10
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
si,
i use shell helix plus. its a semi-synthetic 10W 40 oil. recommended by subaru, and hence what the dealer uses around here. thrash the **** off my engine (non-standard) and have no probs at all..........touch wood![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
p.s. still havent fixed the bloody pc problem mate
i use shell helix plus. its a semi-synthetic 10W 40 oil. recommended by subaru, and hence what the dealer uses around here. thrash the **** off my engine (non-standard) and have no probs at all..........touch wood
![Wink](https://www.scoobynet.com/images/smilies/wink.gif)
p.s. still havent fixed the bloody pc problem mate
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
#11
Scooby Regular
Join Date: Apr 2002
Location: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Posts: 7,333
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs down](https://www.scoobynet.com/images/icons/icon13.gif)
Sorry, I think the shell I have is 10W 40, I previously said it was 5W 40.
And still haven't heard a good thing about Silkolene!
MB
And still haven't heard a good thing about Silkolene!
MB
#12
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Cool](https://www.scoobynet.com/images/icons/icon6.gif)
Right well i harrassed sum kind chap on here who said he had fully synth 10W:40 & he mailed me a millers reps No. so i now have millers motorsport 10W:40 on it's way![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
#17
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
From wot i've seen most subaru dealers seem 2 use 5W:40 Mobil synth stuff that they get in bulk
I await 2b corrected but that's my understanding, limited at it is![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
Si
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
Si
#18
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Yes it is a proper Scooby garage in the north east and they use semi synth 10w 40 elf oil and the last person who had the car used to get it serviced at a proper Scooby garage and they used semi synth 10w 40 magnetec.
#20
![Talking](https://www.scoobynet.com/images/icons/icon10.gif)
One word.....................................MOTUL.
Get the 300v 15w50 fully synthetic, far better oil pressure than anything else i have tried (had Mobil 1 Motorsport 15w50 before) and it uses far better base products etc.
Get the 300v 15w50 fully synthetic, far better oil pressure than anything else i have tried (had Mobil 1 Motorsport 15w50 before) and it uses far better base products etc.
#22
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Magnatec is the same oil as the Subaru dealer were putting in the car before I purchased it so it has got to be alright or they would not use it. The Elf 10w40 oil is what they use now so that has got to be alright aswell hasnt it!
#25
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
I'm gonna ask a really stupid question!
Isnt the first number the cold viscosity of the oil? If so, wouldnt you want a lower first number as that means oil will start cirulating and lubricating the engine a lot better/sonner on startup?
Sorry if the question seems really dumb.
Isnt the first number the cold viscosity of the oil? If so, wouldnt you want a lower first number as that means oil will start cirulating and lubricating the engine a lot better/sonner on startup?
Sorry if the question seems really dumb.
#26
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Cool](https://www.scoobynet.com/images/icons/icon6.gif)
From wot i've read yeah basically tiz true but to a degree 5 & definately 0 as a first number are too thin & i think it was described as the first number being the coldest temp yer likely 2 b starting in & last number hotest but higher if yer going to extremes ie 10:60 good for track days.
But anyway my 10W:40 millers motorsport fully synth competition motor oil has arrived just in time 4 da service tommorrow so i dont care![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
But anyway my 10W:40 millers motorsport fully synth competition motor oil has arrived just in time 4 da service tommorrow so i dont care
![Stick Out Tongue](https://www.scoobynet.com/images/smilies/tongue.gif)
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
#27
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: the middle bit
Posts: 8,238
Likes: 0
Received 0 Likes
on
0 Posts
![Wink](https://www.scoobynet.com/images/icons/icon12.gif)
Having just had me service the reason my dealer, Carstins, said they use magnatec 5W:40 kuz they r also a fiat & isuzu dealer so they need an oil suitable 4 all these. So the bottom line is it aint the best oil 4 scoobs so my advice as they agreed with is 2 get a fully synth oil of wotever grade floats yer boat & take that with ya![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Si
#30
![Post](https://www.scoobynet.com/images/icons/icon1.gif)
Am using it at the moment. Seems ok, have not had any problems running it. Engine done circa 3k, driven hard.
Have been told about the Shell Helix, will be trying that next.
Dan
Edited to add, Subaru say that a 5/40 is ok. So whats wrong with it?
[Edited by Danny Fisher - 5/6/2002 8:24:29 PM]
Have been told about the Shell Helix, will be trying that next.
Dan
Edited to add, Subaru say that a 5/40 is ok. So whats wrong with it?
[Edited by Danny Fisher - 5/6/2002 8:24:29 PM]
Thread
Thread Starter
Forum
Replies
Last Post