uk vn gearbox transfer box
27 November 2013, 03:16 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2013
Location: welling,kent
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
uk vn gearbox transfer box
Are all transfer boxes on vn gearboxes interchangeable with each other? So would a ty752vn6aa transfer box including its gears and bearings bolt straight onto to a ty754vn5aa gearbox? I know the 752 has an inspection plate on top of transfer box but is this the only difference?
28 November 2013, 04:14 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Are all transfer boxes on vn gearboxes interchangeable with each other? So would a ty752vn6aa transfer box including its gears and bearings bolt straight onto to a ty754vn5aa gearbox? I know the 752 has an inspection plate on top of transfer box but is this the only difference?
The later VN series goes to a press clutch at about VN5 or 6AA and that will not swap due to differences in final drive type.
You need all of the 752 type as it unbolts from the main gear case.
Good Luck, David APi
28 November 2013, 05:56 PM
#3
Scooby Regular
Thread Starter
Join Date: May 2013
Location: welling,kent
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
Sorry only just seen this. The answer is yes providing that the 754 VN5AA is still a pull clutch type.
The later VN series goes to a press clutch at about VN5 or 6AA and that will not swap due to differences in final drive type.
You need all of the 752 type as it unbolts from the main gear case.
Good Luck, David APi
28 November 2013, 06:21 PM
#4
Scooby Regular
Thread Starter
Join Date: May 2013
Location: welling,kent
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
Also another thing you may be able to help with. The Ty752vn1aa,2aa,3,4,5&6aa aswell as the ty754vn1aa,2aa,3&4aa all have male front diff & female drive shafts that push over stub from front diff. The ty754vn5aa&6aa both have female front diff (so holes in side of gearbox) and male drive shafts that insert into front diff. What I would like to know is can the front diffs be swapped round? So a female front diff from ty754vn5aa&6aa into one of the earlier ones & vice versa
29 November 2013, 10:50 AM
#5
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Also another thing you may be able to help with. The Ty752vn1aa,2aa,3,4,5&6aa aswell as the ty754vn1aa,2aa,3&4aa all have male front diff & female drive shafts that push over stub from front diff. The ty754vn5aa&6aa both have female front diff (so holes in side of gearbox) and male drive shafts that insert into front diff. What I would like to know is can the front diffs be swapped round? So a female front diff from ty754vn5aa&6aa into one of the earlier ones & vice versa
David
29 November 2013, 12:11 PM
#6
Scooby Regular
Thread Starter
Join Date: May 2013
Location: welling,kent
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM