1st and 2nd gear issue
#1
Scooby Regular
Thread Starter
iTrader: (14)
Join Date: Apr 2013
Location: Lingfield
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
1st and 2nd gear issue
Pulled away this morning and all normal until I tried to changed down to second and couldn't and first is stiff too.
I did pull on the gearshift a bit hard, could I have bent the linkage cause all other gears are fine including reverse ?
I did pull on the gearshift a bit hard, could I have bent the linkage cause all other gears are fine including reverse ?
#4
Scooby Regular
Thread Starter
iTrader: (14)
Join Date: Apr 2013
Location: Lingfield
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Driven it 25 miles and no different, the feel on the stick when moving from 1st to 3rd feels lumpy like something has snapped off and the linkage is running over the top of it and the shift pops up slightly in that short movement
#6
Scooby Regular
Thread Starter
iTrader: (14)
Join Date: Apr 2013
Location: Lingfield
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Can't see how, it isn't noisy at all and I can't even push the shift back to even attempt to get it into gear, it feels like your trying to engage a gear that isn't there or the linkage is out of alignment which can't be as all other gears can be engaged, 1st is very stiff though
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM