WR1 exhaust on a wrx?
#2
Scooby Regular
Join Date: Jul 2012
Location: Ipswich
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Hi.
The Wr1 downpipe cat/exhaust will fit on a wrx. Regarding the bore size - after the downpipe cat it's all standard 2.5 inch same as a wrx ppp (back box the same). The Wr1 has a sport cat which is free flowing with a larger cat, so bigger all round, but fits the centre delete section (wrx has cat here). As the Wr1 is a blob it won't fit a classic or a hawk(I don't think). Hope this helps
Phil
The Wr1 downpipe cat/exhaust will fit on a wrx. Regarding the bore size - after the downpipe cat it's all standard 2.5 inch same as a wrx ppp (back box the same). The Wr1 has a sport cat which is free flowing with a larger cat, so bigger all round, but fits the centre delete section (wrx has cat here). As the Wr1 is a blob it won't fit a classic or a hawk(I don't think). Hope this helps
Phil
Last edited by PhilWrx100; 03 June 2014 at 10:30 AM.
Trending Topics
#8
Scooby Regular
Thread Starter
Just to confirm my thought process, swapping to the Wr1 turbo back, I would loose a cat out the exhaust and the one i would still have will be a high flow/better Cat than whats in there at the moment? and it would still pass an mot.
#10
Scooby Regular
Thread Starter
Cool, il push on with that plan then. Without mapping you rekon i would gain much? Im hoping for bit better pick up more than outright power.
On a side note, would the WR1 shocks and springs fit? I'm assuming if they do the car would be 30mm lower? or more?
On a side note, would the WR1 shocks and springs fit? I'm assuming if they do the car would be 30mm lower? or more?
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM