Notices
General Technical
Sponsored by:
Sponsored by: CARiD

gb270 boost .

Thread Tools
 
Search this Thread
 
Old 01 August 2014 | 11:55 PM
  #1  
chrisl25lnf's Avatar
chrisl25lnf
Thread Starter
Scooby Regular
 
Joined: May 2006
Posts: 344
Likes: 0
From: ilkeston / derby
Default gb270 boost .

Hi all ive just bought a gb270 does any 1 no what boost this should run as stock . It has the x3gauages and says 5psi for boost ?? Seems low to me .
Old 02 August 2014 | 12:16 AM
  #2  
daviee's Avatar
daviee
Scooby Regular
 
Joined: Jun 2008
Posts: 1,106
Likes: 0
Default

In the region of 12- 13 psi about .9 bar.
Old 02 August 2014 | 12:29 AM
  #3  
chrisl25lnf's Avatar
chrisl25lnf
Thread Starter
Scooby Regular
 
Joined: May 2006
Posts: 344
Likes: 0
From: ilkeston / derby
Default

Ummm somethings wrong then . It was hitting 15 psi at 1 point . Then I noticed its not goin above 5psi
Old 02 August 2014 | 07:49 AM
  #4  
rb5 stu's Avatar
rb5 stu
Scooby Regular
 
Joined: Apr 2012
Posts: 767
Likes: 1
From: N.I.
Default

First thing to check is the gauge. some cheaper ones are crap.
Old 02 August 2014 | 09:08 AM
  #5  
barnshaw's Avatar
barnshaw
Scooby Regular
iTrader: (1)
 
Joined: Sep 2010
Posts: 884
Likes: 0
Default

does it feel slower? i would imagine if it was genuinely boosting at 15psi and now at 5 you would feel a massive difference.
Old 02 August 2014 | 01:29 PM
  #6  
The Pink Ninja's Avatar
The Pink Ninja
Scooby Regular
iTrader: (23)
 
Joined: Apr 2008
Posts: 6,703
Likes: 2
From: ...
Default

You are driving it and not revving it in neutral arn`t you as that wont show boost as there is no load on the engine
Old 02 August 2014 | 11:42 PM
  #7  
chrisl25lnf's Avatar
chrisl25lnf
Thread Starter
Scooby Regular
 
Joined: May 2006
Posts: 344
Likes: 0
From: ilkeston / derby
Default

Yes im driveing it lol . Might be the pipe to the guage . Yes it feels slow but ive just come from a 500 bhp evo 6 . So might be me .
Old 02 August 2014 | 11:45 PM
  #8  
Steve's Sti's Avatar
Steve's Sti
Scooby Regular
iTrader: (2)
 
Joined: Mar 2013
Posts: 848
Likes: 0
From: Fraserburgh
Default

Could be pulling ignition also mines used to do this
Old 03 August 2014 | 08:58 PM
  #9  
chrisl25lnf's Avatar
chrisl25lnf
Thread Starter
Scooby Regular
 
Joined: May 2006
Posts: 344
Likes: 0
From: ilkeston / derby
Default

Tryed a diffrent 2 port still the same . Umm
Old 04 August 2014 | 12:24 PM
  #10  
Steve's Sti's Avatar
Steve's Sti
Scooby Regular
iTrader: (2)
 
Joined: Mar 2013
Posts: 848
Likes: 0
From: Fraserburgh
Default

if you keep the foot down flat will it slowly get more boost after a few times?
Old 04 August 2014 | 09:01 PM
  #11  
chrisl25lnf's Avatar
chrisl25lnf
Thread Starter
Scooby Regular
 
Joined: May 2006
Posts: 344
Likes: 0
From: ilkeston / derby
Default

If I take the pipe off the actuator and block the pipe up it hit 18 psi . So I think the actuator is no good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
psport
Subaru Parts
3
04 October 2015 07:35 PM
Ganz1983
Subaru
5
02 October 2015 09:22 AM
GB270_CALUM
General Technical
4
01 October 2015 09:50 PM
mistermexican
General Technical
2
01 October 2015 04:30 PM
tjapplejuice
Drivetrain
9
25 September 2015 03:46 PM



Quick Reply: gb270 boost .



All times are GMT +1. The time now is 06:23 PM.