Restrictor pill my99 ppp
#1
Scooby Regular
Thread Starter
Join Date: May 2014
Location: Barcelona
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Hi good morning
I'm reading in the forum info about the size of restrictor but i don't find the correct information😔
I have a my99 gt( in uk is uk2000) with the ppp ecu, ic hose and exhaust.. The car push well but turbo push 1 bar only...
The pill restrictor is the same in uk2000 and the uk2000 ppp ??
Thanks and regards!
I'm reading in the forum info about the size of restrictor but i don't find the correct information😔
I have a my99 gt( in uk is uk2000) with the ppp ecu, ic hose and exhaust.. The car push well but turbo push 1 bar only...
The pill restrictor is the same in uk2000 and the uk2000 ppp ??
Thanks and regards!
#5
Scooby Regular
iTrader: (6)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
aye thats why i asked him to confirm on his boost gauge for both oe & ppp
if the std ran 0.8 then id say the 1.0 was correct reading, but the 0.9 std and 1.0 on ppp shows the ppp isnt make its claimed 1.1bar
i had similar with mine, and setting the preload cured it - though i was using a PSI data monitor as my gauge
if the std ran 0.8 then id say the 1.0 was correct reading, but the 0.9 std and 1.0 on ppp shows the ppp isnt make its claimed 1.1bar
i had similar with mine, and setting the preload cured it - though i was using a PSI data monitor as my gauge
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM