Scott.T

iTrader: (2)

I am considering moving up 1 notch on the turbo front from my current VF28 and I want to run DV delete on either an 18G or 20G.

I know the VF's don't like DV delete, or at least some years ago that was the opinion as it could damage the wheel. TD's were thought to be very tolerant to DV delete.

If I were to go for a TD05-18G or 20G with a Billet wheel would the Billet wheel be OK for the DV delete ?

scooblet

iTrader: (5)

Yes.

jura11

iTrader: (7)

Hi Scott

I would say you will be OK to running Billet 18G or 20G on yours without the DV,TD range is tougher than VF range

We run MDX321T without the DV and most of the turbos we are running DVless and they're been OK

Thanks,Jura

white noise

iTrader: (8)

I went from a vf28 to a td05-18g along with other mods
Running DV delete now just over 18 months and all is fine
I make stainless bungs and DV delete plates for tmic etc

Scott.T

iTrader: (2)

Cheers guy's that'll be the way I go then.....

RS_Matt

Do you sell on ebay? I've been trying to find a kit for years.

white noise

iTrader: (8)

Hi
Sorry no , I don't sell on eBay and I'm not a trader
I work as a machinist and machine these bits at work in my spare time or when machines are free , so make stuff to order
Done inlet spacers, header tank thermal spacers, DV plugs , DV delete plates etc etc
And the odd bits and pieces for rally scoobys like restrictors

Neil

SAM-UK300

iTrader: (8)

I've always run DV delete on TD05's & VF35's no problems.