Notices
General Technical
Sponsored by:
Sponsored by: CARiD

400 bhp turbo advice

Thread Tools
 
Search this Thread
 
Old 08 March 2015 | 08:17 PM
  #1  
biscuittin's Avatar
biscuittin
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2004
Posts: 82
Likes: 0
Default 400 bhp turbo advice

hi all , ive just bought a 2005 wide track type uk and im unsure what turbo is good to run 400 bhp , ive been looking on the new and ive got it down to a few
aps sr40
md321h
afp321h ( which im guessing is same as the md turbo )
sc420
td05 ??
forced performance fp red turbo ( which is for sale on here s/h )
im after advice of anyone that is running any of the above turbos or even another make of turbo , did they make the figure's they where ment to etc
i'm not bothered about a little more lag than the standard turbo , as the car will be used on the track so I wont notice it tbh
rgds paul
Old 08 March 2015 | 09:41 PM
  #2  
MartynJ's Avatar
MartynJ
Scooby Regular
 
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Default

Turbo Technics T36 should be considered too.
Just £900+ vat inc the fitting kit and works really well at the 380-450bhp target area.
It's a direct bolt on same as all of the above.





It's available exclusively through us so feel free to call or email for more info.

Last edited by MartynJ; 08 March 2015 at 09:42 PM.
Old 11 March 2015 | 09:40 PM
  #3  
ian12's Avatar
ian12
Scooby Regular
 
Joined: Mar 2008
Posts: 171
Likes: 5
Default

Is there a twinscroll version of this ?????
Old 12 March 2015 | 01:41 PM
  #4  
ronjeramy's Avatar
ronjeramy
Scooby Regular
iTrader: (1)
 
Joined: May 2006
Posts: 7,833
Likes: 0
From: Cas Vegas
Default

Hi Martyn what sort of power would you get with your turbo on a UK STI just bolted on say with a decat and walbo fuel pump?

Cheers
Old 12 March 2015 | 09:55 PM
  #5  
MartynJ's Avatar
MartynJ
Scooby Regular
 
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Default

Originally Posted by ian12
Is there a twinscroll version of this ?????
No I'm afraid there isn't, we have 2 options on the exhaust housing but they're both single scroll.
Old 12 March 2015 | 10:18 PM
  #6  
MartynJ's Avatar
MartynJ
Scooby Regular
 
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Default

Originally Posted by ronjeramy
Hi Martyn what sort of power would you get with your turbo on a UK STI just bolted on say with a decat and walbo fuel pump?

Cheers
We've only done one virtually standard 2 litre UK STI.
From memory it did 380bhp and 360lbft. We fitted it with larger injectors to give us a bit of headroom an induction kit and mapped it on a speed density patched OE ecu.
Old 12 March 2015 | 10:33 PM
  #7  
ronjeramy's Avatar
ronjeramy
Scooby Regular
iTrader: (1)
 
Joined: May 2006
Posts: 7,833
Likes: 0
From: Cas Vegas
Default

Originally Posted by MartynJ
We've only done one virtually standard 2 litre UK STI.
From memory it did 380bhp and 360lbft. We fitted it with larger injectors to give us a bit of headroom an induction kit and mapped it on a speed density patched OE ecu.
Thanks Martyn, something to look into in the near future, as that is where I'd like my car, keeping it relitively stock looking too.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
hedgecutter
ScoobyNet General
4
25 September 2015 11:42 AM
Nick71
General Technical
21
20 September 2015 03:52 PM
techdw
ScoobyNet General
32
15 September 2015 03:07 PM



Quick Reply: 400 bhp turbo advice



All times are GMT +1. The time now is 04:28 PM.