Jindy005

I really need some help
I have a subaru sti 2004 and the engine Management light keeps coming on we have changed the crank sensor then it went off drove the car for 30 miles then come back on, all 3 sensors are working, can any one help I am very stuck :-(

P0365 Camshaft Bank 1 Sensor B
Changed sensor and wiring loom checked wiring to the block near the Air box
Checked Block connector
Do you think its a Value Timing problem


Please help

bludgod

iTrader: (3)

under what driving conditions did the light first come on?

also could be worth following the wiring back to the connectors and make sure no water has got in:
https://www.scoobynet.com/general-te...on-sensor.html

RW1

i know this was many years ago, but i am in a similar situation. did you ever get to the bottom of this?

i have 0365 constantly coming up. i have changed and swapped the 2x Position sensors and also bought a new AVCS Loom, with no change to the issue. there are a few areas i will be checking soon, 1 of which is the Oil Control Valves, i'll swap them around to see if it changes the code, and the other is the Engine Timing. do you have any pointers to this that may help?