Maf sensor unplugged!??
#1
Maf sensor unplugged!??
Hi guys, I just brought an 04 blobeye an the previous, previous owner spent a good few quid on the engine, front mount, induction kit etc. Running around 300bhp apparently but the maf sensor has been unplugged an taped up....
According to the guy I got it off it was unplugged because it keeps bringing a warning light on but it's not required anyway!
Anyone got any ideas because I'm confused!
Thanks
According to the guy I got it off it was unplugged because it keeps bringing a warning light on but it's not required anyway!
Anyone got any ideas because I'm confused!
Thanks
#2
Going to be needing a new engine soon running it unplugged, reason its unplugged as it wont run with the fault but unplugging it will, get a new maf sensor fitted id not be running the engine until sorted. Guy sounds like he has not a clue so id be getting the mapping checked after a new sensor to make sure all they mods have been adjusted for.
Last edited by **jay**; 07 August 2015 at 09:15 AM.
Trending Topics
#10
WTF indeed. Not just the MAF but the **** poor job at cutting the intake piping. Look at those little swarfs of metal waiting to go straight down the intake into the turbo and engine.
Those rough edges are shocking.... seriously I would be a bit worried about the car judging by what the guy said, the maf issue and the general bodgey nature of things. Get a proper check up mate, to make sure you don't end up with wrecked engine and massive repair bill.
Those rough edges are shocking.... seriously I would be a bit worried about the car judging by what the guy said, the maf issue and the general bodgey nature of things. Get a proper check up mate, to make sure you don't end up with wrecked engine and massive repair bill.
Last edited by FMJ; 07 August 2015 at 09:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM