WRX v3-v4 or STI V3-V4 cams?
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2011
Location: Greece
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
WRX v3-v4 or STI V3-V4 cams?
Hello everyone!!
I would like some help in order to identify
the stock cams that were in the car.
The engine is an ej20k.
The only accurate info I can give is the cam lift
which is 8.4mm.
Base circle is 34mm and the lobe height 42.4mm
if I am correct 42.4-34=8.4mm of lift.
Thanks for reading!!
Harry
I would like some help in order to identify
the stock cams that were in the car.
The engine is an ej20k.
The only accurate info I can give is the cam lift
which is 8.4mm.
Base circle is 34mm and the lobe height 42.4mm
if I am correct 42.4-34=8.4mm of lift.
Thanks for reading!!
Harry
#3
Scooby Newbie
Thread Starter
Join Date: Nov 2011
Location: Greece
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Hello Mick,
Thanks for your reply.
A measure all the camshafts with
a calliper and it gave the above numbers.
I will post some pics from the cams with the calliper on them.
For now I have some pics from the cams.
Thanks for your reply.
A measure all the camshafts with
a calliper and it gave the above numbers.
I will post some pics from the cams with the calliper on them.
For now I have some pics from the cams.
#6
Scooby Newbie
Thread Starter
Join Date: Nov 2011
Location: Greece
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
I want to thank both of you guys for the help identifying the camshafts!!!
It seems that STI and WRX models(ej20k) had the same valve lift...?
The only thing that changes is the line on the cast and maybe the duration.
I did a good search and found the below info.
I hope this would be helpful for future questions!!
Thanks again Mick and JGlanzaV
Harry
It seems that STI and WRX models(ej20k) had the same valve lift...?
The only thing that changes is the line on the cast and maybe the duration.
I did a good search and found the below info.
I hope this would be helpful for future questions!!
Thanks again Mick and JGlanzaV
Harry
Last edited by stihlmaster660; 20 October 2015 at 02:46 AM.
Thread
Thread Starter
Forum
Replies
Last Post