Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Fault codes diagnosed

Thread Tools
 
Search this Thread
 
Old 19 April 2016 | 04:57 PM
  #1  
stefjw's Avatar
stefjw
Thread Starter
Scooby Regular
 
Joined: Feb 2014
Posts: 47
Likes: 0
From: Scotland
Default Fault codes diagnosed

Hi

Looking for advice on fault codes. I've got a V3 Type R, check engine light has come on.

I'm getting codes

23 Mass Air Flow SensorCircuit
24 Idle Control System Malfunction
33 vehicle speed sensor

The check engine light was coming on occasionally and would clear if I dipped the clutch and let the car idle. The revs would also hunt for a few seconds when coming to a stop before settling. Now the engine lights on permanently, which has stopped all of the rpm hunting, but the car does now idle at about 250rpm more than usual

Any suggestions appreciated

Thanks
Old 19 April 2016 | 05:51 PM
  #2  
madscoob's Avatar
madscoob
Scooby Regular
iTrader: (3)
 
Joined: Jul 2008
Posts: 3,084
Likes: 2
From: u cant touch this
Default

is the speedo working, because if it isn't it will throw up codes as the ecu doesn't know how fast the car is going, so it will default to closed loop fueling, setting off other codes
Old 19 April 2016 | 07:22 PM
  #3  
stefjw's Avatar
stefjw
Thread Starter
Scooby Regular
 
Joined: Feb 2014
Posts: 47
Likes: 0
From: Scotland
Default

Originally Posted by madscoob
is the speedo working, because if it isn't it will throw up codes as the ecu doesn't know how fast the car is going, so it will default to closed loop fueling, setting off other codes
Many Thanks for the reply

Yes you're right the speedo just stopped working last week which was when the occasional check light started. The light never stayed on to begin with so I feared it may have been something else. The dashboards recently been out so the speedo clusters probably where my problem is.

Thanks for the help
Old 19 April 2016 | 07:25 PM
  #4  
madscoob's Avatar
madscoob
Scooby Regular
iTrader: (3)
 
Joined: Jul 2008
Posts: 3,084
Likes: 2
From: u cant touch this
Default

no probs, sort the speedo out first do a ecu reset and see if that cures it before you start spending silly money
Old 19 April 2016 | 07:53 PM
  #5  
stefjw's Avatar
stefjw
Thread Starter
Scooby Regular
 
Joined: Feb 2014
Posts: 47
Likes: 0
From: Scotland
Default

Originally Posted by madscoob
no probs, sort the speedo out first do a ecu reset and see if that cures it before you start spending silly money
The engines already on borrowed time I think. Currently slightly down on compression due to a suspected burnt valve :/

So I'll be needing a new one soon, was hoping to get a bit more life out this one yet though

I

Last edited by stefjw; 19 April 2016 at 07:54 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ben.harris
ScoobyNet General
11
12 March 2023 07:56 PM
jody0702
General Technical
0
06 April 2016 01:49 PM
imprezachris88
General Technical
6
01 April 2016 07:18 PM
paniopan
ScoobyNet General
0
29 March 2016 03:52 PM
martinb344
ScoobyNet General
2
26 March 2016 10:27 PM



Quick Reply: Fault codes diagnosed



All times are GMT +1. The time now is 08:23 PM.