Forester 3plug Ecu Pin out diagram
14 January 2017 | 01:51 PM
#1
Thread Starter
Scooby Newbie
Joined: Jan 2015
Posts: 19
Likes: 0
From: Brighton
Forester 3plug Ecu Pin out diagram
Hi there. I am looking for a pin out diagram for a V7 Ecu year 99/00 it's a 3plug.
I need to find the cam sensor pins as the live feed wire is broken and need to by pass it .as I am getting fault code no signal from cam sensor
Regards Russ
I need to find the cam sensor pins as the live feed wire is broken and need to by pass it .as I am getting fault code no signal from cam sensor
Regards Russ
14 January 2017 | 07:55 PM
#3
Don't think I have the wiring diagram, but it won't have a live feed wire.
It has two signal wires, one of which is connected to sensor ground at the ECU, the other is the signal.
If you're expecting to find +12V there and have diagnosed a wiring fault because of this then you need to look further.
Most likely just the sensor has failed.
It has two signal wires, one of which is connected to sensor ground at the ECU, the other is the signal.
If you're expecting to find +12V there and have diagnosed a wiring fault because of this then you need to look further.
Most likely just the sensor has failed.