Joined: Dec 2017

Posts: 8

Likes: 0

From: Wakefield

Hi guys i have a 1995 wrx. Which has all of a sudden decided to develop a misfire on 1 cylinder.

It seems like it is not getting enough voltage to the coil. It has a 12 v live all the coils do but the other pin in the plug that plugs into the coil (which i assune is a negative?) shows 2v on that particular coil but 10v on other coils.

Does anybody have a wiring diagram of the idnition coil and how the ignition system is workkng on the 1995 wrx i understand they have a ignitor also. 5 pin entry plug and 4 pin exit pin which i assume is the wiring which goes straight to the coils?

Has anybody experienced this before and any help would be appreciated thanks guys.

Joined: Feb 2003

Posts: 7,640

Likes: 772

From: Harpenden

Joined: Dec 2017

Posts: 8

Likes: 0

From: Wakefield

Joined: Feb 2009

Posts: 5,860

Likes: 42

From: Mount Weather

Joined: Dec 2017

Posts: 8

Likes: 0

From: Wakefield

No I havent mate will do tomorow. I dont think its the coil but will try a coil off a diffrent cylinder to seenif the misfire is still on the same cylinder. Are they know for the ignitor to pack up?

Joined: Feb 2009

Posts: 5,860

Likes: 42

From: Mount Weather

Joined: Dec 2017

Posts: 8

Likes: 0

From: Wakefield

hi after doing a few checks on it today it turns out it is 100% a faulty coil.Do you know where i could get 1 from

Joined: Feb 2009

Posts: 5,860

Likes: 42

From: Mount Weather