Geometry / Tracking on MY02
28 April 2003, 02:24 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone recommend somewhere to get geometry set up done properly in the South East ? going for new tyres and was hoping that with a modified set up they might wear evenly ? has anyone achieved this or is it just wishful thinking ???
John ps should I get it done before or after new tyres go on ?
John ps should I get it done before or after new tyres go on ?
29 April 2003, 10:19 AM
#2
Scooby Regular
iTrader: (2)
Join Date: Feb 2003
Location: 2.1 Spec-C .......Pimms O'clock!!
Posts: 2,726
Likes: 0
Received 0 Likes
on
0 Posts
Hi John
My standard WRX wore the inside of both front tyres down to the string at only 6K!!!! - the outside and centre of both tyres had loads of meat left (normal road driving, no track days or racing etc..)
I got my wheels laser aligned and tracked at Elite in Rainham on the A13 in Essex, then a few weeks later changed my wheels for 18's with new tyres and have not had any uneven wear since!! The new wheels and tyres have been on for about 1K so far and cant see any scrubbing or wear at present!
Hope this helps
Ross
My standard WRX wore the inside of both front tyres down to the string at only 6K!!!! - the outside and centre of both tyres had loads of meat left (normal road driving, no track days or racing etc..)
I got my wheels laser aligned and tracked at Elite in Rainham on the A13 in Essex, then a few weeks later changed my wheels for 18's with new tyres and have not had any uneven wear since!! The new wheels and tyres have been on for about 1K so far and cant see any scrubbing or wear at present!
Hope this helps
Ross
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM