VSS Sensors..
29 April 2003, 02:23 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
was there a difference with these sensors between
92-92
97-98
99-00
01+
My 92-96 5spd uk one wont fit in the sti7 box... the hole is too small..
Are the outputs the same.. or shall I pursuade mine to fit.. by a bit of machining.. and possible re-threading.
David
92-92
97-98
99-00
01+
My 92-96 5spd uk one wont fit in the sti7 box... the hole is too small..
Are the outputs the same.. or shall I pursuade mine to fit.. by a bit of machining.. and possible re-threading.
David
30 April 2003, 01:00 AM
#3
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: Norn Iron
Posts: 2,786
Likes: 0
Received 0 Likes
on
0 Posts
Ive seen a few different ones, but think they are all similar. 12v feed, neg, and signal. All the early ones are interchangeable AFAIK, but havent looked at the 6 speed one yet.
30 April 2003, 09:30 AM
#4
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Well in that case they arent interchangable with the 6spd as it has a smaller hole.. may consider turning it down or making an adaptor..
David
David
Thread
Thread Starter
Forum
Replies
Last Post