Notices

Engine Mount or Thrust Bearing?

Thread Tools
 
Search this Thread
 
Old 29 April 2003, 10:26 PM
  #1  
Turbo_Steve
Scooby Regular
Thread Starter
 
Turbo_Steve's Avatar
 
Join Date: Aug 2001
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Unhappy

I can drive the car normally from cold and nothing happens.

However, once I have accelerated hard (high boost etc) a regular squeak becomes apparent (as though the clutch plate were gently rubbing against something). Going over bumps makes a BIG squeak.
Pulling to a stop, the squeak will continue. If you rev the engine hard, it goes away until the revs drop.
Shove the engine block by hand and it squeaks louder.
Switch the engine off and slam the doors or the boot and each slam will get you a little squeak. Let it all cool down and it all goes away.

The noise is coming from somewhere in the vicinity of the bellhousing.

Please guys....any ideas?
Old 29 April 2003, 10:29 PM
  #2  
submannz
Scooby Regular
 
submannz's Avatar
 
Join Date: Jul 2001
Posts: 799
Likes: 0
Received 0 Likes on 0 Posts
Post

Sounds like engine mounts have died. You could also try lubricating the engine and tranny mounts with CRC or WD40.

[Edited by submannz - 4/29/2003 10:31:03 PM]
Old 29 April 2003, 11:08 PM
  #3  
Turbo_Steve
Scooby Regular
Thread Starter
 
Turbo_Steve's Avatar
 
Join Date: Aug 2001
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Cool

Ok...will give it a try. Thanks.
Old 29 April 2003, 11:31 PM
  #4  
UkLegacyT
Scooby Regular
 
UkLegacyT's Avatar
 
Join Date: Jan 2002
Posts: 1,909
Likes: 0
Received 0 Likes on 0 Posts
Post

try the exhaust bracket on the gearbox. its at the rear of the gearbox, and is a metal to metal fit. if the bolt has worked loose, it can squeak badly and wind you up

ian
Old 30 April 2003, 12:56 AM
  #5  
Turbo_Steve
Scooby Regular
Thread Starter
 
Turbo_Steve's Avatar
 
Join Date: Aug 2001
Posts: 1,355
Likes: 0
Received 0 Likes on 0 Posts
Cool

groovy.
Thanks...will check that too.
Old 30 April 2003, 09:34 AM
  #6  
SiHethers
Scooby Regular
 
SiHethers's Avatar
 
Join Date: Dec 2002
Posts: 349
Likes: 0
Received 0 Likes on 0 Posts
Post

Check the exhaust heat shields for cracks, too. If the manifold shields crack you get this. See FAQ on SIDC website for more info.

Cheers

Simon
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
02 July 2023 01:54 PM
kenc
Wanted
6
02 October 2015 09:12 PM
shorty87
Other Marques
0
25 September 2015 08:52 PM
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM



Quick Reply: Engine Mount or Thrust Bearing?



All times are GMT +1. The time now is 10:51 PM.