De- Restricting 2 Ltr Turbo
#1
Thread Starter
Scooby Regular
Joined: Aug 2001
Posts: 2,467
Likes: 0
From: Stockport Cheshire Xbox Gamertag: Scooby WRX SMACS Member
I was wondering if anybody knew how to De-Restrict my 93 Scooby 2 Ltr Turbo it's still showing Kmh and once it hits 180 ( 110 Mph ) it backs off and does not respond to any acceleration.
I would be grateful for any advice and how much this will cost me !!!
I would be grateful for any advice and how much this will cost me !!!
#3
Wah !!!
WHat you need is a small gearing ratio converter that fits on the speedo cable, you disconnect the cable from the gearbox plug the cable in the small matchbox sized unit and the plug the unit into the gearbox.
This changes the revolution speed of the cable thus converting your speedo to MPH, you will also need to change your dial to read MPH either with a sticker of replacmenet face.
Check out the following link..
WHat you need is a small gearing ratio converter that fits on the speedo cable, you disconnect the cable from the gearbox plug the cable in the small matchbox sized unit and the plug the unit into the gearbox.
This changes the revolution speed of the cable thus converting your speedo to MPH, you will also need to change your dial to read MPH either with a sticker of replacmenet face.
Check out the following link..
#5
Dizzy... (By name or nature )
yep.. it will do both on the mechanical speedos...
I done mine and I've not been restricted to 110mph (on private roads )
O.M.
[This message has been edited by Octane Man (edited 22 August 2001).]
yep.. it will do both on the mechanical speedos...
I done mine and I've not been restricted to 110mph (on private roads )
O.M.
[This message has been edited by Octane Man (edited 22 August 2001).]
Thread
Thread Starter
Forum
Replies
Last Post