Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Wiper Skip

Thread Tools
 
Search this Thread
 
Old 08 January 2004 | 03:38 AM
  #1  
Turbo_Steve's Avatar
Turbo_Steve
Thread Starter
Scooby Regular
 
Joined: Aug 2001
Posts: 1,355
Likes: 0
Question

Why does my driver swiper start skipping across the screen at 80mph? Passengers one is fine. It's a pain because it leave "chop marks"...collections of water that are halfway down the window and then the wiper skips leaving them EXACTLY in my field of view. It gets no better if you go faster.

I have tried Bosch wipers (with the really big spoiler on the back) thinking this would fix it, to no avail. I traied Subaru Offical items (EXPENSIVE!!!!) and they are no better either.

This has bugged me for 2 years now and is a pain in the backside.

It only does it on the downward stroke, so it's obviously the wiper struggling against the air rushing up the windscreen.

What can I do?
Old 08 January 2004 | 09:03 AM
  #2  
Daz WRX's Avatar
Daz WRX
Scooby Regular
 
Joined: May 2002
Posts: 586
Likes: 0
From: Pompy
Post

You could try some rainX on the windscreen, this may help, does wonders for the rear windows with no wipers.
Daz.
Old 08 January 2004 | 09:08 AM
  #3  
StickyMicky's Avatar
StickyMicky
Scooby Regular
 
Joined: Feb 2003
Posts: 21,611
Likes: 0
From: Zed Ess Won Hay Tee
Thumbs down

mine chops as well mate
Old 08 January 2004 | 02:33 PM
  #4  
KMH's Avatar
KMH
Scooby Regular
 
Joined: Apr 2003
Posts: 62
Likes: 0
Post

Hi

Presume you have changed the whole blade and not just the rubber.
Used to just change the rubber myself resulting in skip, then changed the whole blade to Champion and it's now 100%. Hope this helps.
Old 08 January 2004 | 03:12 PM
  #5  
Turbo_Steve's Avatar
Turbo_Steve
Thread Starter
Scooby Regular
 
Joined: Aug 2001
Posts: 1,355
Likes: 0
Post

Can certainly TRY a champion. Am changing the whole thing bar the arm every time. The Subaru ones have an extra bit in the middle of the blade...which makes NO difference at all. Waste of £60

Will try the champion stuff.

Any other suggestions?
Old 08 January 2004 | 03:20 PM
  #6  
SCOOBY TOWERS's Avatar
SCOOBY TOWERS
Scooby Regular
iTrader: (7)
 
Joined: Aug 2002
Posts: 2,989
Likes: 0
From: Lancashire & District Subaru
Post

Is the spring on the conecting arm ok / strong enough ?
May have been over stretched at one point.

Other than that try cleaning the screen with vinager and newspaper.
It removes all the grease which helps with smearing as well as sticking blades.

Chris
Old 08 January 2004 | 03:23 PM
  #7  
AJT's Avatar
AJT
Scooby Regular
 
Joined: Aug 2002
Posts: 183
Likes: 0
Post

I changed to the PIAA wipers - they coat the screen with the 'rainX' style slippy stuff (technical term ) No jumping or skipping.
Old 08 January 2004 | 04:16 PM
  #8  
Turbo_Steve's Avatar
Turbo_Steve
Thread Starter
Scooby Regular
 
Joined: Aug 2001
Posts: 1,355
Likes: 0
Post

It's definitely not grease on the windscreen: It's an aerodynamic thing. The wiper arm spring is a possibility though!

Will check that in a minute.
Old 08 January 2004 | 06:55 PM
  #9  
ZAZ's Avatar
ZAZ
Scooby Regular
 
Joined: Feb 2001
Posts: 555
Likes: 0
From: Kent
Cool

I had this until I fitted a PIAA blade and since then it has been fine. They also coat the screen with silicon which means over 70-80mph water get blown up the screen so you can drive in heavy rain without even needing the wipers on. Not cheap but definitely worth it!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 08:12 PM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
Phil3822
Lighting and Other Electrical
20
27 September 2015 08:39 PM
Phil3822
ScoobyNet General
21
25 September 2015 08:46 PM
mickywrx
General Technical
5
15 September 2015 08:51 PM




All times are GMT +1. The time now is 11:38 PM.