I need to get to my "Actuator"
#1
![Question](https://www.scoobynet.com/images/icons/icon5.gif)
I need someone to explain to me how to get to the Actuator on my MY01. Being a bit Fick pictures would be great.
I'm assume the intercooler has to come off
I'm assume the intercooler has to come off
![Frown](https://www.scoobynet.com/images/smilies/frown.gif)
#3
Scooby Regular
iTrader: (1)
Join Date: Oct 2001
Location: South East
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
![Talking](https://www.scoobynet.com/images/icons/icon10.gif)
no pics im afraid ... but i did just replace mine to sort out my wavie boost!
here goes - very easy - takes about 20 mins 2 swop for a new one..
take the intercooler off - be careful with the fins...
then - unbolt the heatsheald around the turbo. there are abt 6x10mm bolts there ... some are a bit tricky to get your hand too - and a racket spanner is helpful if you have one!
then you can see the actuator. its held on with another 2x10mm bolts , and a C-clip on the actual wastegate arm - make sure u dont loose it!
make sure you put abt 2mm of tension preload on the actuator arm to get it back over the FULLY SHUT wastegate.
cheers
Steve
here goes - very easy - takes about 20 mins 2 swop for a new one..
take the intercooler off - be careful with the fins...
then - unbolt the heatsheald around the turbo. there are abt 6x10mm bolts there ... some are a bit tricky to get your hand too - and a racket spanner is helpful if you have one!
then you can see the actuator. its held on with another 2x10mm bolts , and a C-clip on the actual wastegate arm - make sure u dont loose it!
make sure you put abt 2mm of tension preload on the actuator arm to get it back over the FULLY SHUT wastegate.
cheers
Steve