Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Error code 24 Idle control system malfunction

Thread Tools
 
Search this Thread
 
Old 02 March 2004 | 05:13 PM
  #1  
stevem2k's Avatar
stevem2k
Thread Starter
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default Error code 24 Idle control system malfunction

Have the above error logged as current when I hooked up the deltadash for the first time, however the idle seems fine (1100rpm cold, drops gradually to 700rpm as it warms up), and rpm increases if I turn on the A/C.

I'm presuming this is the ISCV, is it a 'get it out and clean' item or are they sealed ? Also, could someone point me in it's general location ? MY00 engine ( well, close enough.... )


I'd use the search......but.....


Cheers
Steve
Old 02 March 2004 | 05:35 PM
  #2  
The_Judge's Avatar
The_Judge
Scooby Regular
 
Joined: Jul 2003
Posts: 1,457
Likes: 0
From: Out of darkness cometh light
Default

Clicky for you. If you scroll down to page 38, I believe it's item (2)... and yes, they can be cleaned with brake cleaner.
Old 02 March 2004 | 08:10 PM
  #3  
stevem2k's Avatar
stevem2k
Thread Starter
Scooby Regular
 
Joined: Sep 2001
Posts: 4,670
Likes: 0
From: Kingston ( Surrey, not Jamaica )
Default

ta very muchly.

Steve
Old 02 March 2004 | 09:11 PM
  #4  
Dark Blue Mark's Avatar
Dark Blue Mark
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Reset the ECU and see if it comes back. That one can be linked to other faults IMO.

MB
Old 03 March 2004 | 04:45 PM
  #5  
Myk's Avatar
Myk
Scooby Regular
 
Joined: Feb 2002
Posts: 1,077
Likes: 0
From: Sunny Dorset
Default

Had the same prob on my MY93, it turned out to be the backing plate was loose, causing bad earth? but setting the CEL light off. Reseting ECU worked initially but prob kept getting worse. There was no problem in the engine i.e. running, tickover, pick up etc. Once i tightened it no more probs.

Mike
Old 03 March 2004 | 06:03 PM
  #6  
mo,s scoobymonster's Avatar
mo,s scoobymonster
Scooby Regular
 
Joined: Dec 2003
Posts: 1,009
Likes: 0
Default

yes i had thid code cumming on i reset the ecu when i put my new walbro fuel pump in and its been fine since no lights nothing
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
04 November 2021 08:12 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 11:49 AM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
sedge69
Wanted
0
01 October 2015 10:44 PM




All times are GMT +1. The time now is 11:35 PM.