Manual Booste Controller
09 March 2004 | 05:14 PM
#1
Thread Starter
Scooby Newbie
Joined: Feb 2004
Posts: 9
Likes: 0
From: Whiteley
Manual Booste Controller
Has anyone fitted a MBC or Bleed Valve for cheap performance gains. If so what boost is safe to run on standard fuelling and do you replace the EBC that is fitted to the car . I used to use one on my Fiat Coupe and for an extra 3/4 psi of boost it run fine. I know it's not the best way of improving BHP but with an ECU that is constantly learning surely you could take the boost levels a bit higher.
09 March 2004 | 05:30 PM
#2
Scooby Regular
Joined: Feb 2004
Posts: 300
Likes: 0
From: West Sussex
Originally Posted by scub703
Has anyone fitted a MBC or Bleed Valve for cheap performance gains. If so what boost is safe to run on standard fuelling and do you replace the EBC that is fitted to the car . I used to use one on my Fiat Coupe and for an extra 3/4 psi of boost it run fine. I know it's not the best way of improving BHP but with an ECU that is constantly learning surely you could take the boost levels a bit higher.
The fuel cut is 15.5 psi so you should be safe at 15.
But get a boost gauge so you know what your running, ive got one on the way myself
Thread
Thread Starter
Forum
Replies
Last Post