Twohats

iTrader: (3)

can anyone tell me the best place to t in the boost pipe on a my03 sti.
thx
ive tried a search but to no avail
also wheres the cheapest place to buy the oil pressure and temp attachments for the engine end.
THX
Andy

Gidney&Knowlesy

Roger Clark sell them 01455828610 ask for Chris or Simon

Twohats

iTrader: (3)

cheers extreme ill give em a bell later.


any one help me with the boost pipe i know on the classic there was a small blank plug but not sure on my new one there is a small straight connector in the pipe which runs back to the boost sensor but not sure if this would affect the sensor at all.

stevejohnson511

Just fitted a subaru boost gauge,instructions show to cut the small pipe comming off the dump valve (on right of intercooler)50mm from the end and T it in there.

Twohats

iTrader: (3)

cheers steve tried that but to no avail so i eventually T'd it in on the small pipe coming off the front of the inlet manifold near like the alternator area seems to work alright there(peaks at 4.0 bar)lol
thx
Andy