VTA Dump Valve Fitting Guide for MY97
#1
![Question](https://www.scoobynet.com/images/icons/icon5.gif)
Hi Guys,
Was wondering if any1 has got a guide for fitting a VTA dump valve on a MY97 impreza, preferably with pictures if possible.
cheers
Mo
Was wondering if any1 has got a guide for fitting a VTA dump valve on a MY97 impreza, preferably with pictures if possible.
cheers
Mo
#2
Scooby Regular
Join Date: Sep 2003
Location: Nottingham during week, Leeds at Weekends and 5ive-o.org at night
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Just take off the old dump valve.
Fit new one into pipe on right that comes from under intercooler.
Fit a bung in the pipe on left that is short from the air induction pipework (you will need a jubilee clip to secure it in place).
Fit the small bore pipe from inlet manifold to the new dump valve (the same pipe that was connected to the standard dump valve).
Took me all of 15 mins to fit mine.
Hope this helps you.
Fit new one into pipe on right that comes from under intercooler.
Fit a bung in the pipe on left that is short from the air induction pipework (you will need a jubilee clip to secure it in place).
Fit the small bore pipe from inlet manifold to the new dump valve (the same pipe that was connected to the standard dump valve).
Took me all of 15 mins to fit mine.
Hope this helps you.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM