Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Pink 565 Injectors ..P1?

Thread Tools
 
Search this Thread
 
Old 09 May 2004 | 03:50 AM
  #1  
wooosh's Avatar
wooosh
Thread Starter
Scooby Regular
 
Joined: Dec 2002
Posts: 398
Likes: 0
From: P1 Aberdeen.
Default Pink 565 Injectors ..P1?

Hi,

Currently have a TDO5/O6-20G turbo fitted to the P1 with the uprated fuel pump/sytec reg, scoobysport dp, blitz NUR spec zorst, JR panel filter and Tek3. Only running at 1.2 bar due to injectors being at 91% so I need to uprate them to up the power.

I have the chance of a set of Pink 565 injectors. Can anyone confirm that these will fit right in with no mods as I have heard conflicting stories.

Thanks,
Old 09 May 2004 | 09:08 AM
  #2  
stevebt's Avatar
stevebt
Scooby Regular
iTrader: (8)
 
Joined: Sep 2002
Posts: 16,732
Likes: 33
Default

they will need modifying to fit your car as they are for the new shape impreza
Old 09 May 2004 | 10:16 AM
  #3  
R19KET's Avatar
R19KET
Scooby Regular
 
Joined: May 1999
Posts: 2,637
Likes: 0
From: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Default

They are totally wrong for your car.

You need a Phase two "side feed" injector, and the Pink's are "top feed".

It's not a case of modifying the injectors, you would have to completely change your fuel rails, and I don't think it's very practical.

Mark.
Old 09 May 2004 | 07:55 PM
  #4  
wooosh's Avatar
wooosh
Thread Starter
Scooby Regular
 
Joined: Dec 2002
Posts: 398
Likes: 0
From: P1 Aberdeen.
Default

Thanks lads, I think I might be getting my wires crossed.

Are there any Phase 2 565 STI injectors available on the market or what is the best alternative?

Last edited by wooosh; 09 May 2004 at 08:19 PM.
Old 10 May 2004 | 12:27 AM
  #6  
R19KET's Avatar
R19KET
Scooby Regular
 
Joined: May 1999
Posts: 2,637
Likes: 0
From: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Default

There are Phase two 550cc injectors available. Ideally, go for the Apexi, or similar. I'm not keen on the Mazda 550's.

Speak to Mike at Scoobymania. He should have stock very shortly.

Mark.
Old 10 May 2004 | 12:40 AM
  #7  
stevebt's Avatar
stevebt
Scooby Regular
iTrader: (8)
 
Joined: Sep 2002
Posts: 16,732
Likes: 33
Default

Originally Posted by R19KET
There are Phase two 550cc injectors available. Ideally, go for the Apexi, or similar. I'm not keen on the Mazda 550's.

Speak to Mike at Scoobymania. He should have stock very shortly.

Mark.

seen the apexi ones on greenline as i was thinking of buying some yet it still says the need modifying to fit a 99/00 car
Old 10 May 2004 | 01:56 AM
  #8  
R19KET's Avatar
R19KET
Scooby Regular
 
Joined: May 1999
Posts: 2,637
Likes: 0
From: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Default

The connectors are slightly different.

The kits from Scoobymania come with new connectors, or, you can "modify" the stock connector.

Greenline would be another option.

Mark.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
29 December 2015 12:07 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
Mister:E
ScoobyNet General
0
28 September 2015 08:46 PM
hedgecutter
General Technical
3
25 September 2015 03:35 PM




All times are GMT +1. The time now is 01:16 AM.