What boost level on a 95 V2 STI RA 7K ECU
28 May 2004, 02:30 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2003
Location: Isle of Skye
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
What boost level on a 95 V2 STI RA 7K ECU
Can any one tell me what the standard boost is on a 95 V2 WRX STI RA, 7K ecu?
and what is a safe level I can take it to? as I fitted a gizzmo upgrade chip/board so I can run on 97/98 ron fuel, but needs the boost upping to compensate for the lower octane map,I asked Gizzmo electronics about fuel cut but they told me the only cut I will hit is 100% duty cycle, what ever that means.
and what is a safe level I can take it to? as I fitted a gizzmo upgrade chip/board so I can run on 97/98 ron fuel, but needs the boost upping to compensate for the lower octane map,I asked Gizzmo electronics about fuel cut but they told me the only cut I will hit is 100% duty cycle, what ever that means.
28 May 2004, 03:44 PM
#2
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
why dont you just run octane booster?
Its cheap enough
You should also get yourself a knocklink, i would suggest that everyone with a JDM car have one of these fitted (i do)
Tony
Its cheap enough
You should also get yourself a knocklink, i would suggest that everyone with a JDM car have one of these fitted (i do
)Tony
28 May 2004, 09:08 PM
#4
Scooby Regular
Join Date: Dec 2001
Location: Just far enough from sunny Liverpool
Posts: 6,963
Likes: 0
Received 0 Likes
on
0 Posts
will safely run 1.1 bar if fuelling is adjusted. for the minimal cost I'd get in touch with the guys at scoobyecu, you may need the map that scott t did for my STi2 RA as at the time they did mine they hadn't done another.
cheap at around £100 for the safety factor...
simon
ps if you get stuck tim-h bought my old car and I think he's changed the ECU
cheap at around £100 for the safety factor...
simon
ps if you get stuck tim-h bought my old car and I think he's changed the ECU
