Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Blitz R-VIT

Thread Tools
 
Search this Thread
 
Old 01 June 2004 | 01:21 PM
  #1  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default Blitz R-VIT

Looks good, anyone tried one?

At £300 ish it might be a cheaper alternative to the SECS? Connects to the ODB II port, and gives:

The R-VIT can read and display real time engine readings such as speed, tachometer, water temp, voltage, injector pulse, intake air temperature, air flow, inlet manifold temperature, oxygen reading, throttle position and many more. The data shown on the R-VIT is dependent upon the data read by the vehicles ECU and varies in different vehicles. A listing of what information is displayed per vehicle is in the Blitz 2004 Power Book.

Just not vehicle specific (unless you have a Nissan) so might not have all the listed features...

MB
Old 01 June 2004 | 06:20 PM
  #2  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Uh-oh, one of those posts where no body replies



MB
Old 01 June 2004 | 11:27 PM
  #3  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Yes Mark, I think it looks like a good piece of kit

MB
Old 02 June 2004 | 08:53 AM
  #4  
RB5 Paul's Avatar
RB5 Paul
Scooby Regular
 
Joined: May 2003
Posts: 755
Likes: 0
Default

I do too mate,i'm just wondering whether it will work properly with a 99my rb5
Old 02 June 2004 | 09:38 AM
  #5  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

That was my issue with the SECS, many of the features didn't work for a classic scoob, AFR etc...

MB
Old 02 June 2004 | 09:50 AM
  #6  
Jamie Whitfield's Avatar
Jamie Whitfield
Scooby Regular
 
Joined: Dec 1998
Posts: 1,687
Likes: 0
Default

Hi Mark

We were one of the first Blitz suppliers in the country to get these into stock, and they work a treat, really easy to install, has a clearer and prettier display than anything on the market too, and looks good on your dash unlike some.

If you have any questions please just ask.

Jamie

www.j-w-racing.co.uk
Old 02 June 2004 | 09:56 AM
  #7  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Thanks Jamie,

Can you list the features that work on a classic scoob?

Ta

MB
Old 02 June 2004 | 09:58 AM
  #8  
Jamie Whitfield's Avatar
Jamie Whitfield
Scooby Regular
 
Joined: Dec 1998
Posts: 1,687
Likes: 0
Default

Basically all of the above, I will try to compile a list...
Old 02 June 2004 | 10:03 AM
  #9  
Daz_WRX's Avatar
Daz_WRX
Scooby Regular
 
Joined: Feb 2004
Posts: 684
Likes: 0
Default

how could i fit it to my 97 WRX it hasnot got the port underr the steering column, Cheers
Old 02 June 2004 | 10:05 AM
  #10  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Nope, needs the Select port. (ODBC II port)

MB
Old 02 June 2004 | 10:05 AM
  #11  
Jamie Whitfield's Avatar
Jamie Whitfield
Scooby Regular
 
Joined: Dec 1998
Posts: 1,687
Likes: 0
Default

Off the top of my head, there are probably many more but I haven't got one on a car to count them all I'm afraid, they are in stock here though!

- Boost Pressure
- Road Speed
- Coolant Temperature
- Battery voltage
- Coolant temperature
- Intake temperature
- Fuel injector pulse width
- Ignition point
- Knock correction
- Lambda air/fuel ratio
- Throttle position
- Air flow meter mass
Old 02 June 2004 | 10:06 AM
  #12  
Daz_WRX's Avatar
Daz_WRX
Scooby Regular
 
Joined: Feb 2004
Posts: 684
Likes: 0
Default

Originally Posted by Dark Blue Mark
Nope, needs the Select port. (ODBC II port)

MB
so it wont fit my97? thats a bit pony aint it, and i really wanted one
Old 02 June 2004 | 11:05 AM
  #13  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Thanks Jamie, are they definate? I'd like to see one hooked up to confirm it, or at least you to have seen one working

MB
Old 02 June 2004 | 11:29 AM
  #14  
Jamie Whitfield's Avatar
Jamie Whitfield
Scooby Regular
 
Joined: Dec 1998
Posts: 1,687
Likes: 0
Default

I have seen them working and they are definites above, but why not order one and if you're not happy and it is is a resaleable condition just return it, I am that confident with them!
Old 02 June 2004 | 12:07 PM
  #15  
Dark Blue Mark's Avatar
Dark Blue Mark
Thread Starter
Scooby Regular
 
Joined: Apr 2002
Posts: 7,333
Likes: 0
From: Bournemouth - 5x Ex Impreza owner. 997 GT3 CS.
Default

Ta Jamie, just wanted to check!

Can you post a pic up, I think it looks very smart (looked on your site)

MB
Old 02 June 2004 | 01:09 PM
  #16  
Jamie Whitfield's Avatar
Jamie Whitfield
Scooby Regular
 
Joined: Dec 1998
Posts: 1,687
Likes: 0
Default

No problem for bigger pics take a look here:

http://bbs.scoobynet.co.uk/showthread.php?t=307639
Old 02 June 2004 | 01:45 PM
  #17  
TonyFlow's Avatar
TonyFlow
Scooby Regular
 
Joined: Jan 1999
Posts: 1,293
Likes: 0
Default

Nope, needs the Select port. (ODBC II port)
Excellent, so I can get it to work with the RDBMS we use at work
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tarling
Subaru Parts
10
19 October 2015 08:58 PM
crazyspeedfreakz
Wanted
17
05 October 2015 08:19 PM
Ganz1983
Subaru
5
02 October 2015 10:22 AM
Dan-
General Technical
0
21 September 2015 02:32 PM
Decayes
ScoobyNet General
5
11 September 2015 08:47 PM




All times are GMT +1. The time now is 03:23 AM.