SUBARU BOOST
#1
SUBARU BOOST
hi all, have just bought a boost gauge for my99 preza. having taken it out for a bit of a spin found that it boosts to 12psi in 5th. is this normal?? also have invested in a bleed valve when i put this on what can the boost be wound upto? i have just got the standard ecu. thanks for reading this and i would like to hear what you all think. thanks simon
#2
Originally Posted by preza si
hi all, have just bought a boost gauge for my99 preza.
having taken it out for a bit of a spin found that it boosts to 12psi in 5th. is this normal??
also have invested in a bleed valve when i put this on what can the boost be wound upto?
The only way to know what boost pressure is safe is to monitor detonation, and ideally air:fuel ratio. You can do the former with a KnockLink and the latter with an AFR meter.
i have just got the standard ecu.
Last edited by greasemonkey; 16 June 2004 at 08:59 PM.
#6
Plug it into a Select Monitor or DeltaDash, or, if you don't have access to those, just lift the passenger footwell carpet and the ECU cover, and look at the label. Will be either AE800, AE801 or AE802.
#7
Trending Topics
#9
Originally Posted by scooby95wrx
stop giving it stick round the lanes
will
will
#13
AE800 and 801 are about the same power wise. AE802 develops slightly less power, feels smoother (i.e. car comes on boost a little more gradually), has more active knock detection and a reputation for hesitant throttle response.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
29 December 2015 12:07 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM