FSE boost valve install problem......
26 November 2004, 01:52 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: herts....
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
FSE boost valve install problem......
hi
can anyone tell me where does the vacuum hose go to??? can anyone please post a photo with a FSE installed on a pre-facelift classic??
thanks
can anyone tell me where does the vacuum hose go to??? can anyone please post a photo with a FSE installed on a pre-facelift classic??
thanks
26 November 2004, 02:49 PM
#2
Former Sponsor
iTrader: (30)
Join Date: Jan 2005
Location: FB Tuning Workshop - HP27
Posts: 4,219
Likes: 0
Received 0 Likes
on
0 Posts
The vacuum hose goes to the same point on the inlet manifold that the original vacuum hose went to.
On my MY00 it attaches to the inlet runner to the cylinder directly in front of the turbo, although you could attach it to any suitable take-off on the inlet manifold
On my MY00 it attaches to the inlet runner to the cylinder directly in front of the turbo, although you could attach it to any suitable take-off on the inlet manifold
26 November 2004, 11:42 PM
#3
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: herts....
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fiestaboy
The vacuum hose goes to the same point on the inlet manifold that the original vacuum hose went to.
On my MY00 it attaches to the inlet runner to the cylinder directly in front of the turbo, although you could attach it to any suitable take-off on the inlet manifold
On my MY00 it attaches to the inlet runner to the cylinder directly in front of the turbo, although you could attach it to any suitable take-off on the inlet manifold
27 November 2004, 08:30 AM
#4
Scooby Regular
when you removed the O.E. reg there will have been a small diameter vaccum pipe.............simply extend this to the new reg and plumb to the top small pipe next to the chrome adjuster/lock nut
hope this helps
alyn - asperformance.com
hope this helps
alyn - asperformance.com
27 November 2004, 12:48 PM
#5
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: herts....
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stockcar
when you removed the O.E. reg there will have been a small diameter vaccum pipe.............simply extend this to the new reg and plumb to the top small pipe next to the chrome adjuster/lock nut
hope this helps
alyn - asperformance.com
hope this helps
alyn - asperformance.com
27 November 2004, 08:14 PM
#6
Scooby Regular
dependant on the kit, you should have another piece of (normally) red vaccum hose to do exactly this or join the two together to reach..............
where have you positioned it??
alyn - asperformance.com
where have you positioned it??
alyn - asperformance.com
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM