JOHNSTI

as the title say's trying to fit a boost cut defender anybody got a clue usal stuff my 94 wrx and hears a pic to help

JOHNSTI

Anybody?

Delboy2

The plug in the picture is for the Pressure Exchange Solenoid not the map sensor. The map sensor isn't pictured but is in close proximity and has a 3 wire plug & socket and a vac/pressure pipe attached to it.

Cheers

Delboy2

If you locate the 3 wire plug/socket - Pin 1 is = +5vdc, Pin 2 is = Negative(ground), Pin 3 = Map Sensor Signal Hope this helps.

Cheers

JOHNSTI

Nice on m8 Shows how much i know i will look for what you said

ScoobyDuck

iTrader: (1)

i would do it inside. by the ECU. wiring diagrams are out there, and means connections are less likely to get mucky /corrode etc etc.

Steve

JOHNSTI

Good idea just need to find said diagrams

KLR16V

iTrader: (2)

You will find the workshop manuals with all drawings here

http://www.saxonfields.freeserve.co.uk/

hope this helps

Mark