Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Burning smell?

Thread Tools
 
Search this Thread
 
Old 09 December 2004 | 02:50 PM
  #1  
madjust's Avatar
madjust
Thread Starter
Scooby Regular
 
Joined: Jun 2004
Posts: 144
Likes: 0
From: Harlow, Essex
Question Burning smell?

I have an oil burning smell coming into the car (my94 wrx) on investigation its coming from the drivers side of the engine bay and the smoke seems to be coming from the exhaust pipe area anyone have any ideas?
Old 09 December 2004 | 03:54 PM
  #2  
STI-R/A's Avatar
STI-R/A
Scooby Regular
 
Joined: Jul 2004
Posts: 236
Likes: 0
Default

Hi mate check your rocker cover gaskets - I have the same problem and my mechanic has suggested this.

Cheers.
Old 09 December 2004 | 04:01 PM
  #3  
AvalancheS8's Avatar
AvalancheS8
Scooby Regular
 
Joined: Jun 2003
Posts: 461
Likes: 0
Default

Originally Posted by STI-R/A
Hi mate check your rocker cover gaskets - I have the same problem and my mechanic has suggested this.

Cheers.
I'd almost guarantee that's what it is.
The driver's side one dries out and leaks because of the heat from the exhaust passing just underneath.

It's a pretty easy job to do yourself, a couple of hours taking it easy and careful, nothing heavy or tight. Make sure you do the seals on all the bolts too if you do decide to do it yourself.
Old 09 December 2004 | 04:03 PM
  #4  
GariYaRally's Avatar
GariYaRally
Scooby Regular
 
Joined: Jul 2003
Posts: 645
Likes: 0
From: AKA: AFRIKANZ - BRING BACK THE SAFARI RALLY!
Default

Have a look at power steering reservoir/pump too........ the bearings on my pump decided to call it a day, emptied all the contents directly on the heat shield/exhaust and had a nice little fire going (enough for a couple of marshmellows) before I put it out.....
Old 09 December 2004 | 04:10 PM
  #5  
willy's Avatar
willy
Scooby Regular
 
Joined: Sep 2003
Posts: 1,472
Likes: 0
From: SMACS member,Resident valeter/pc installer
Default

I`ll go with rocker cover gaskets as well.
They harden and weep with age.
Its a labour intensive job so could be expensive for what it is.
Old 10 December 2004 | 09:40 AM
  #6  
madjust's Avatar
madjust
Thread Starter
Scooby Regular
 
Joined: Jun 2004
Posts: 144
Likes: 0
From: Harlow, Essex
Default

thanks guy's ill do the rocker cover first then. Do i have to get the gasket from a main dealer or are ther any motor factors that do it. im in essex by the way.


thanks
Old 11 December 2004 | 10:40 AM
  #7  
KLR16V's Avatar
KLR16V
Scooby Regular
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,052
Likes: 0
From: Chester
Default

I have just rebuilt engine on 93 wrx
I think it is main dealer
you need 2 spark plug gaskets, 1 rocker and 6 bolt rubbers
part numbers
spark plug ; 11051AA070 £8 each
rocker cover ; 13270AA040 £8.98 each
bolt rubbers ; 13271AA051 £2 each

I also used gasket sealer about £13 for a large tube it is different to normal gasket sealer as it is high temp resistant i got this from AS performance ask for Alan he may even have some spare gaskets lying around as i got some parts for engine rebuid from
him at very cheap prices , make sure you degrease everything before you put together i got a can of degreaser spray for about £3 helps the sealer .


Mark
Old 11 December 2004 | 10:41 AM
  #8  
KLR16V's Avatar
KLR16V
Scooby Regular
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,052
Likes: 0
From: Chester
Default

As performance 07957203719 all parts arrived next day very helpful man.

Mark
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ALi-B
Other Marques
18
28 September 2015 08:29 PM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM
Rustless
General Technical
2
14 September 2015 09:34 PM
Rocco13
ScoobyNet General
8
13 September 2015 08:11 PM



Quick Reply: Burning smell?



All times are GMT +1. The time now is 10:19 PM.