Mine's snapped off. The siren was replaced about 1 yr ago, but this time it's the main bracket that's snapped.



Can you get replacements from a Dealer?

Stefan

 

Hi Stefan. A long time since we last spoke regarding window closers!
You may still be able to get a replacement siren bracket from a dealer although we no longer produce these - the part number is SACC 3469. Depending on the age of the vehicle, the bracket may require a slight modification to make the mounting holes line up.
The brackets tended to snap as they were sometimes bent out of the way to access service items on the engine and then bent back.
I can e-mail to you a full list of part numbers (1999 to 2005) relating to securty system parts, if these may be of use to you or other members.
SS

 

Hi, it has been a while; good to hear from you again. I'll check the Dealer with that part number thanks.

Failing that I might ask a m8 if he can fabricate one for me. Depends if Subaru want my arm and my leg

Cheers,
Stefan

 

Mine is now held on with pop rivets if that's any help.

 

You could always make one if your stuck...

2 to 1.5mm thick steel strip, drill, hacksaw, file, vice and a hammer

And some black hamerite to tart it up

 

black hammerite? I was thinking about getting it powder coated to match the rest of my engine bay

 

Hi Ozzy,

Mine is the same - MY99, snapped off in exactly the same place. I enquired with my local dealer, IIRC it was around the £25 mark for a replacement. I plan to make a new one........

Cheers

Greg

 

I had the exact same thing happen on mine - no need for a new bracket etc

This is what I did







No problems with the alarm at all