max stock boost for my94 import
#1
max stock boost for my94 import
new to the forum wondered if someone could tell me wot level of boost a stock my94 import should run?
mines peaking at 14 pounds then holding 12 pounds.cheers jason
mines peaking at 14 pounds then holding 12 pounds.cheers jason
#2
Originally Posted by jasongled1
new to the forum wondered if someone could tell me wot level of boost a stock my94 import should run?
mines peaking at 14 pounds then holding 12 pounds.cheers jason
mines peaking at 14 pounds then holding 12 pounds.cheers jason
Boost gauges are not always spot on
Following is a quote from Scott T:
Boost Targets & Fuel-Cut Limits
(yours)
WRX/STi Saloon ECU's 2C, U8, W6, W9 - As above, 11.47psi held to redline. Fuel-cut 14.57psi
WRX (1995/96) ECU Z4 - 12.71psi, dropping to 11.78psi @ 6600rpm. Fuel-cut 15.65psi.
UK/Aus/Euro ECU's V7, 7D and 6D - 11.47psi, dropping to 9.47psi at 6600rpm. With Fuel-cut @ 14.87psi
UK Prodive ECU - 13.33psi (peaks to 13.64 @ 5600rpm, drops to 12.71psi @ 6600rpm). Fuel-Cut 15.65psi.
STi RA (1996) ECU 7K - 13.17psi (peaks to 13.64psi @ 5800rpm). Fuel-Cut 15.96psi.
WRX Wagon ECU V9 - 10.55psi dropping to 6.84psi (starts to drop @ 5000rpm). Fuel-Cut 13.79psi
Z4 and UK Prodrive map are near identicle, with the Prodrive Map running slightly more boost.
IMHO the Z4 ECU is the best stock WRX ECU you can get, as it has much tidier fuel and igntion maps. Comparing it to the earlier ECU's I'm suprised the earlier cars run at all.....
A Z4 ECU will also run fine in a UK and give near UK PPP performance.
Thread
Thread Starter
Forum
Replies
Last Post