question-strut brace
22 March 2005 | 04:30 PM
#2
Originally Posted by hillywrc
hi ppl is there anything i should know about fitting a strut brace to a classic is it straight forward?
Very simple
The Suspension legs will not fall out when you remove the nuts as the weight of the car holds them in place.
Dean
22 March 2005 | 06:08 PM
#3
Scooby Regular
Joined: Jan 2001
Posts: 6,812
Likes: 1
From: West Sussex
The Suspension legs will not fall out when you remove the nuts as the weight of the car holds them in place.
This can be done on the road side. No need to jack the car.
Take the nuts off the top mount (3 on each strut top)
Place strut brace over studs and replace nuts and torque to the correct setting
Do not tighten the nuts with a 3ft bar!!!!! They will snap!!
Do not move the car while the top mounts are loose!
22 March 2005 | 07:31 PM
#4
Thread Starter
Scooby Regular
Joined: Feb 2004
Posts: 110
Likes: 0
From: dudley/gornal
Originally Posted by Dyney
As long as you don't jack the car up
This can be done on the road side. No need to jack the car.
Take the nuts off the top mount (3 on each strut top)
Place strut brace over studs and replace nuts and torque to the correct setting
Do not tighten the nuts with a 3ft bar!!!!! They will snap!!
Do not move the car while the top mounts are loose!
This can be done on the road side. No need to jack the car.
Take the nuts off the top mount (3 on each strut top)
Place strut brace over studs and replace nuts and torque to the correct setting
Do not tighten the nuts with a 3ft bar!!!!! They will snap!!
Do not move the car while the top mounts are loose!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
29 December 2015 12:07 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM