Replacing fuel pump
#1
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Mar 2001
Posts: 8,353
Likes: 0
From: Here and there
Replacing fuel pump
Hi guys,im in the middle of changing my fuel pump ive removed the back seat but couldnt remember which cover to remove so i removed both i cant find the old pump anywhere can anyone give me a step by step guide preferably with pics so i can complete the job before it gets dark (or rains)
all help very much appreciated
ps car is an MY98 type R if that assists
all help very much appreciated
ps car is an MY98 type R if that assists
#4
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Mar 2001
Posts: 8,353
Likes: 0
From: Here and there
sounds like a nightmare job,dont suppose anyone can scan in the walkthrough guide in issue 2 of scooby mag can they LOL
worth a go
someone must have an idiots guide to doing a fuel pump im sure most of the users on here have done it
worth a go
someone must have an idiots guide to doing a fuel pump im sure most of the users on here have done it
#5
Originally Posted by scooby-tc
sounds like a nightmare job,dont suppose anyone can scan in the walkthrough guide in issue 2 of scooby mag can they LOL
worth a go
someone must have an idiots guide to doing a fuel pump im sure most of the users on here have done it
worth a go
someone must have an idiots guide to doing a fuel pump im sure most of the users on here have done it
I found it easier to remove the back seat in my car when trying to get to the pump. You might have a fold down rear seat not sure which spec you have.
Anyway if your looking into the boot ie the car is in front of you. There is a dome shaped thing on the right with 4 screws in it. Remove this
Underneath is a metal thing with 3 pipes coming out of it. Take off the 3 pipes, remove the white plug and unscrew the 8mm bolts. The whole pump and float unit will lift out. (you migh need to turn it a little to get it out)
You will see the pump attached to the float etc.
#6
Thread Starter
Scooby Regular
iTrader: (2)
Joined: Mar 2001
Posts: 8,353
Likes: 0
From: Here and there
Cheers all for your help,pump is now done all bar the wiring bit which i need to buy some connectors for.On the old unit there was a resistor type thing is this needed on the new pump or can i remove and bin it?
Right ive decided to stop before i throw it through the window,i'll try again tomorrow
Right ive decided to stop before i throw it through the window,i'll try again tomorrow
Last edited by scooby-tc; 01 June 2005 at 07:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM
DogsofWar
Engine Management and ECU Remapping
16
23 September 2015 07:41 PM