Standard Boost Pressures????
09 August 2005, 11:47 AM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2004
Location: Manchester
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Standard Boost Pressures????
What should be the standard boost pressure for a MY95 JDM saloon?
My turbo gauge reads 0.5 bar when full acceleration in 5th gear, is that right?
What do other impreza's read??
Cheers
My turbo gauge reads 0.5 bar when full acceleration in 5th gear, is that right?
What do other impreza's read??
Cheers
09 August 2005, 12:06 PM
#2
my 93 has a 0.9 max, though it never quire reaches it. I think 95s are the same.
sound like your ECU is in limp-home mode
Do a search for instructions on re-setting it and checking for error codes
sound like your ECU is in limp-home mode
Do a search for instructions on re-setting it and checking for error codes
09 August 2005, 12:14 PM
#3
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
The JDM WRX 1995 has a boost target of 11.47psig(0.79bar) with a boost cut of 14.87psig(1.02bar) - for the boost to be at 0.5bar it would seem it is in 'safe' mode - the ECU has probably detected a fault. If you look HERE this shows how to initiate the diagnostic procedure so to locate any sensor faults. 
Cheers
Cheers
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Wheels And Tyres For Sale
0
29 September 2015 02:18 PM