hard turbo inlet pipe
27 September 2005, 06:50 PM
#1
Scooby Regular
Thread Starter
iTrader: (15)
Join Date: Jul 2001
Location: Portsmouth
Posts: 8,606
Likes: 0
Received 0 Likes
on
0 Posts
hard turbo inlet pipe
Im switching to a hard inlet pipe, mashed the OE and didnt fancy a samco item.
to anyone else who's done this on a 99 car...
how did you get from 63mm up to the 90mm maf housing please>?
to anyone else who's done this on a 99 car...
how did you get from 63mm up to the 90mm maf housing please>?
27 September 2005, 08:03 PM
#3
Scooby Regular
Join Date: Feb 2002
Location: Behind the 400BHP door :)
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
Not Me!!! 
I used a 76mm---63mm Reducing Samco 90' Bend. This is then coupled to a 76mm Alloy ring. This in turn is fitted to the Black 90mm--76mm Reducing elbow that comes in a K+N 57i Kit.
I had to trim the Black K+N piece down quite considerably so as to fit the MAF in under my FMIC hose, but it all sits sweetly now!!
(Kinda helps if you re-locate the Power Steering Tank too!!)
I used a 76mm---63mm Reducing Samco 90' Bend. This is then coupled to a 76mm Alloy ring. This in turn is fitted to the Black 90mm--76mm Reducing elbow that comes in a K+N 57i Kit.
I had to trim the Black K+N piece down quite considerably so as to fit the MAF in under my FMIC hose, but it all sits sweetly now!!
(Kinda helps if you re-locate the Power Steering Tank too!!
)
Last edited by PICKLE; 27 September 2005 at 08:06 PM.
28 September 2005, 04:54 PM
#6
Originally Posted by PICKLE
Not Me!!!
I used a 76mm---63mm Reducing Samco 90' Bend. This is then coupled to a 76mm Alloy ring. This in turn is fitted to the Black 90mm--76mm Reducing elbow that comes in a K+N 57i Kit.
I had to trim the Black K+N piece down quite considerably so as to fit the MAF in under my FMIC hose, but it all sits sweetly now!!
(Kinda helps if you re-locate the Power Steering Tank too!!)
I used a 76mm---63mm Reducing Samco 90' Bend. This is then coupled to a 76mm Alloy ring. This in turn is fitted to the Black 90mm--76mm Reducing elbow that comes in a K+N 57i Kit.
I had to trim the Black K+N piece down quite considerably so as to fit the MAF in under my FMIC hose, but it all sits sweetly now!!
(Kinda helps if you re-locate the Power Steering Tank too!!
)
Home built airbox?
Trending Topics
28 September 2005, 05:22 PM
#9
Scooby Regular
Thread Starter
iTrader: (15)
Join Date: Jul 2001
Location: Portsmouth
Posts: 8,606
Likes: 0
Received 0 Likes
on
0 Posts
got to laugh, you picked the most overcast day day going to photograph your car 
I get the idea though and will be following suit, cheers for the pics
Ive just bought a K&N kit for a 99 car 2nd hand so will have a better look-see when it arrives.
Ive also butchered my maf housing at either end to make it as short as possible, In the process I have junked the mesh slip
Cant see any issues but the voices in my head are wailing already!
I get the idea though and will be following suit, cheers for the pics
Ive just bought a K&N kit for a 99 car 2nd hand so will have a better look-see when it arrives.
Ive also butchered my maf housing at either end to make it as short as possible, In the process I have junked the mesh slip
Cant see any issues but the voices in my head are wailing already!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM