ic water spray
10 October 2005, 03:55 PM
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2004
Posts: 2,202
Likes: 0
Received 0 Likes
on
0 Posts
ic water spray
hello i have a version 4 type r with the ic water spray, i'm not sure if its working, it has the auto function which lites up when on & the manual button when pressed i can hear a click of a relay towards the glove box, is there any way to test if its working when stationary?
i assume it only works when moving at a set rpm?
i have pulled the pipes apart & sucked up the water & blown thru the jets no blockages, the tank has water in it so, i'm now stuck.
where abouts is the pump, so i can see if the wires have come off?
any help guys
i assume it only works when moving at a set rpm?
i have pulled the pipes apart & sucked up the water & blown thru the jets no blockages, the tank has water in it so, i'm now stuck.
where abouts is the pump, so i can see if the wires have come off?
any help guys
11 October 2005, 07:26 PM
#2
Scooby Regular
Join Date: Aug 2004
Location: Stirlingshire; Wrx type RA STi version 2 V-Limited; #097/555
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
Easy!
I don't have an auto setting on mine, but when i push the button (with the bonnet up) a load of water gets sprayed (it's timed ~2 seconds) from the jets in the bonnet scoop.
If you put yours on manual mode the same will happen. If it's working. Auto mode looks at boost level/inlet temperature so will only work when driving along.
The pump is located at the bottom of the water resevoir.
I don't have an auto setting on mine, but when i push the button (with the bonnet up) a load of water gets sprayed (it's timed ~2 seconds) from the jets in the bonnet scoop.
If you put yours on manual mode the same will happen. If it's working. Auto mode looks at boost level/inlet temperature so will only work when driving along.
The pump is located at the bottom of the water resevoir.
11 October 2005, 08:42 PM
#4
Scooby Regular
Join Date: Sep 2005
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
While being on the I/C topic, I have also got a problem with mine. There is a loose pipe under my bonnet just hanging around and fires out the water after pressing the I/C button. Does anyone know where exactly that little hose is suppose to be connect to?
Cheers
Cheers
12 October 2005, 04:55 PM
#6
Scooby Regular
Join Date: Aug 2004
Location: Stirlingshire; Wrx type RA STi version 2 V-Limited; #097/555
Posts: 630
Likes: 0
Received 0 Likes
on
0 Posts
satpink,
yes, the pump is mounted on the side of the resevoir at the bottom. It looks like a window washer pump (probably is the same) and has (on mine) one electrical connection, and one pipe leading to the bonnet.
SCOO8Y,
Does water come from both jets in the bonnet scoop?
One pipe comes from the water resevoir, it goes round the back of the engine and fixes to the under side of the bonnet. It is then split into two by a Y-piece and these two pipes feed the jets inside the bonnet scoop.
yes, the pump is mounted on the side of the resevoir at the bottom. It looks like a window washer pump (probably is the same) and has (on mine) one electrical connection, and one pipe leading to the bonnet.
SCOO8Y,
Does water come from both jets in the bonnet scoop?
One pipe comes from the water resevoir, it goes round the back of the engine and fixes to the under side of the bonnet. It is then split into two by a Y-piece and these two pipes feed the jets inside the bonnet scoop.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
